IoT and SCADA terms starting with L include LTE-M, LoRaWAN, LwM2M and Last will. Each of the 52 entries has a plain definition, its topic and related terms, and how Hermetry handles it where it does.
Showing 0 terms on L · Clear
52 terms on this page · Search all 1,000 terms · Download the whole glossary (PDF, 1.8 MB, 80 pages)
L
Ladder logic
A graphical PLC programming language that looks like electrical relay diagrams, with contacts and coils on rungs. It is one of the IEC 61131-3 languages and is still the most common in machine control.
LAN (local area network)
A network that connects devices within a building, site or plant, usually over Ethernet and Wi-Fi. Industrial sites often split their LAN into separate segments for office, control and devices.
Last mile (delivery)
The final step of delivering goods from a local hub to the customer, often the most expensive part of logistics. Vehicle tracking, temperature monitoring and proof of delivery data help manage it.
Last will (MQTT LWT)
A message an MQTT client leaves with the broker when it connects. If the client disappears without saying goodbye, the broker publishes the message, so others learn the device went offline.
In Hermetry Hermetry allows a will message but ignores it; it decides a device’s connection state itself. More about Last will
Latched alarm
An alarm that stays active after its condition has gone away, until someone acknowledges or resets it. Latching makes sure brief events, such as a short pressure spike, are not missed.
Latency
The time between something happening and the data about it arriving where it is used. Monitoring can live with seconds; closed-loop control needs milliseconds and stays local.
LBT (listen before talk)
A rule that a radio must check that a channel is free before transmitting, instead of or as well as obeying a duty-cycle limit. Some regions require it in licence-free bands to share the spectrum fairly.
LDAP (Lightweight Directory Access Protocol)
A protocol for reading and managing a directory of users, groups and devices. Applications use it to check sign-ins and group membership against a company’s central directory.
Leachate monitoring
Measuring the level and quality of liquid that drains through a landfill, which must be collected and treated before it reaches groundwater. Level sensors and pumps in leachate wells are monitored remotely.
Leak detection
Finding leaks from data: flow at times when nothing should flow, water balance gaps, pressure drops or acoustic signals. Fast detection limits damage and water loss.
In Hermetry The server room use case brings leak detection into Hermetry next to temperatures, humidity and UPS values. More about Leak detection
Leak noise logger
A small acoustic sensor attached to water pipes or valves that listens at night for the noise of leaks. Comparing loggers along a pipe narrows down where a leak is, before it surfaces.
Lean manufacturing
A way of running production that removes waste, such as waiting, overproduction and defects, and keeps work flowing to customer demand. Machine data shows where the waste really is.
Legionella
Bacteria that grow in warm water systems and cause a serious lung infection when inhaled in droplets. Water systems are kept below 20 °C or above 50–60 °C, and temperature monitoring of outlets and tanks proves it.
Level crossing
A place where a road or path crosses a railway at the same level, protected by barriers, lights and train detection. Remote monitoring reports barrier position, lamp failures, power and faults to maintenance teams.
In Hermetry The level crossing use case watches crossings and signalled junctions in Hermetry through their controllers’ status outputs. More about Level crossing
Level sensor
A sensor that measures how full a tank, well, silo or channel is, using pressure, radar, ultrasound, float, capacitance or other methods. Level is one of the most monitored values in water, fuel and process plants.
LiDAR
A sensor that measures distance by timing laser pulses reflected from objects, building a precise 3D picture of its surroundings. It is used for people counting, traffic, volume measurement of stockpiles and autonomous vehicles.
Lifecycle management (device)
Managing a device from manufacture and provisioning through configuration, updates and monitoring to decommissioning. Platforms track each stage so that nothing is forgotten, such as revoking the credentials of a retired device.
Lighting control
Switching and dimming lights by schedule, occupancy, daylight or command, from single rooms to whole streets. Connected lighting also reports burning hours, energy use and failed lamps.
Lightning surge
A short, very high voltage pulse induced in cables by a nearby lightning strike or switching event. Outdoor sensors, antennas and long field cables need surge protection on power and signal lines.
Limit switch
A switch operated by the movement of a machine part, used to detect end positions of doors, valves, gates and conveyors. Its contact is wired to a digital input and often to safety interlocks.
Line of sight
A clear straight path between two antennas. Higher-frequency and long-range links need it, while lower frequencies bend and pass through obstacles better; see also the Fresnel zone.
Linearisation (sensor)
Correcting a sensor whose output is not proportional to the measured value, using a formula or a lookup table. Thermocouples, tank volume from level and some flow devices all need it.
Link budget
The sum of gains and losses between a transmitter and a receiver, in dB: transmit power, antenna gains, cable and path losses against the receiver’s sensitivity. It shows whether, and with how much margin, a link will work.
Lithium thionyl chloride battery (Li-SOCl₂)
A primary (non-rechargeable) battery with very high energy density and very low self-discharge, which lasts more than ten years in sensors that send little. It cannot deliver large current pulses on its own, so it is often paired with a capacitor.
Lithium-ion battery
A rechargeable battery with high energy density, used in trackers, phones and devices with solar panels. It ages with charge cycles and heat and must not be charged below freezing.
Load balancing
Spreading incoming connections or requests across several servers so no single one is overloaded and a failed server is bypassed. Device brokers and APIs are load balanced to handle large fleets.
Load cell
A sensor that converts force or weight into an electrical signal, usually with strain gauges. Load cells weigh silos, tanks, trucks and bins, and monitor loads on cranes and structures.
Load factor
Average power over a period divided by peak power in the same period, in percent. A low load factor means short, high peaks, which raise demand charges and the size of the connection a site needs.
Load management
Controlling when and how much power loads draw, such as EV chargers, heat pumps or pumps, to stay within a limit or use cheaper hours. It lets a site add loads without a bigger grid connection.
Load profile
A record of power demand over time, usually in 15-minute or hourly steps. It shows when a site uses energy and where peaks come from.
Load shedding
Switching off less important loads on purpose to keep total demand under a limit, such as a contract peak or the capacity of a generator. Automatic load shedding acts in seconds based on live power readings.
Local/remote mode
A switch or setting that decides whether equipment takes commands from the panel next to it or from a remote control system. Remote commands are refused in local mode, so people working on a machine are not surprised.
Log management
Collecting, storing and searching the event logs of devices, gateways and servers in one place. It helps engineers find the cause of faults and security teams spot attacks.
Long polling
A way for a client to get updates over plain HTTP: it sends a request that the server holds open until there is news or a timeout, then sends another. Devices that cannot keep a socket open can receive commands this way.
Loop tuning
Adjusting the settings of a control loop, usually the PID gains, so the process reaches its setpoint quickly without overshoot or oscillation. Badly tuned loops waste energy and wear valves and pumps.
Loop-powered device
A transmitter that takes its operating power from the same two wires as its 4–20 mA signal, so it needs no separate supply. The 4 mA live zero is what leaves enough current to run the electronics.
LoRa
A spread-spectrum radio modulation that reaches several kilometres at very low power by trading speed for range. LoRaWAN is the network protocol built on top of it.
LoRaWAN
An open low-power wide-area network protocol on top of LoRa radio. Battery sensors send small messages over kilometres to gateways, which pass them to a network server.
In Hermetry Hermetry runs its own LoRaWAN network server, so LoRaWAN gateways and devices connect to it directly. More about LoRaWAN
LoRaWAN gateway
A radio receiver that hears LoRaWAN devices nearby and forwards their frames to a network server, and sends downlinks back. One gateway can serve thousands of devices.
In Hermetry You add LoRaWAN gateways to Hermetry and watch their status and position on a map. More about LoRaWAN gateway
LoRaWAN relay
A LoRaWAN feature in which a battery device forwards frames between end devices out of gateway range and a gateway. It extends coverage into basements and remote corners without adding a full gateway.
In Hermetry Hermetry shows LoRaWAN relays and routers running in local mode, which run a network server on the router itself. More about LoRaWAN relay
Lot traceability
Being able to follow a batch of product or material forward to where it went and back to where it came from, together with its process data. Food and pharma regulations require it for recalls.
LOTO (lockout/tagout)
A safety procedure that isolates machines from energy sources and locks and tags the isolation before maintenance, so nobody can restart them by accident. Digital LOTO records who isolated what and when.
Low-code
Building applications, flows or dashboards by configuring visual blocks instead of writing much code. In IoT it lets engineers create rules and automations themselves, with code kept for the unusual cases.
Low-power mode (sleep)
A state in which a device switches off most of its circuits and wakes only on a timer or an interrupt. Battery sensors spend nearly all their time asleep; the sleep current largely decides how many years a battery lasts.
LPWAN (low-power wide-area network)
A class of networks that send small amounts of data over long distances with very little energy, so sensors run for years on a battery. LoRaWAN, NB-IoT and LTE-M are examples.
LTE (Long Term Evolution)
The 4G cellular standard that provides most mobile data today. IoT uses its low-power variants, LTE-M and NB-IoT, and categories such as Cat 1 for devices that need more bandwidth.
LTE Cat 1
A low-rate LTE device category, up to about 10 Mbit/s down, that works on ordinary 4G networks. It suits gateways and trackers that need more speed than LTE-M but not a full smartphone modem.
LTE Cat-M1
The device category name for LTE-M in the mobile network specifications. See LTE-M.
LTE Cat-NB1
The device category name for the first release of NB-IoT in the mobile network specifications; later releases added Cat-NB2. See NB-IoT.
LTE-M (LTE Cat-M1)
A low-power cellular technology for IoT on 4G networks. It allows mobility and voice and has more bandwidth than NB-IoT, while still saving energy with sleep modes.
In Hermetry Gateways and devices with LTE-M connectivity are listed in Hermetry’s device catalogue. More about LTE-M
Lux
The unit of illuminance, the amount of light falling on a surface. Light sensors measure lux so lighting control can dim lights when daylight is enough and keep workplaces at the required level.
LwM2M (Lightweight M2M)
An open device management standard built on CoAP, with standard objects for things like firmware, connectivity and sensors. It covers registration, reading, writing and updates of constrained devices.
See your own devices on Hermetry
Connect a first device, watch its readings live and set an alarm on it. Start free, or ask us to set it up with you.

