New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

IoT glossary: P

IoT and SCADA terms starting with P: P&ID, PAC, Packet collision, Packet forwarder and 91 more, each with a plain definition.

IoT and SCADA terms starting with P include PLC, Predictive maintenance, Polling and Power factor. Each of the 95 entries has a plain definition, its topic and related terms, and how Hermetry handles it where it does.

95 terms on this page · Search all 1,000 terms · Download the whole glossary (PDF, 1.8 MB, 80 pages)

P

P&ID (piping and instrumentation diagram)

A detailed drawing of a process plant: pipes, vessels, pumps, valves, instruments and control loops, each with its tag. SCADA process screens are often drawn after it.

Automation and controlRelated: Tag, HMI, SCADA

PAC (programmable automation controller)

A controller that combines the robustness of a PLC with the processing, networking and multi-language programming of a PC. It suits applications that mix control, data handling and communications.

Automation and controlRelated: PLC, RTU, IEC 61131-3

Packet collision

Two devices transmitting on the same channel at the same time so that neither message is received. On simple radio networks the chance of collisions grows with the number of devices and how long each message is on air.

ConnectivityRelated: Time on air, Duty cycle, Radio channel

Packet forwarder

The software on a LoRaWAN gateway that passes received frames to the network server. The older UDP packet forwarder has no encryption or authentication of its own; newer gateway software uses secure connections.

ConnectivityRelated: Basics Station, LoRaWAN gateway

Packet loss

Packets that never reach their destination because of interference, collisions, congestion or weak signal. Telemetry protocols handle it with retries, acknowledgements or by accepting occasional gaps.

ConnectivityRelated: Confirmed uplink, MQTT QoS, PER

Paging (cellular)

The way a cellular network tells an idle device that data is waiting for it. Longer paging intervals save battery but delay commands sent to the device.

ConnectivityRelated: PSM, eDRX, Downlink

Pairing (Bluetooth)

The process in which two Bluetooth devices exchange keys so they can recognise each other and communicate securely later. Installers often pair a sensor with a phone app to configure it.

ConnectivityRelated: BLE, Provisioning, Session keys

Pallet tracking

Following pallets and returnable containers through warehouses, trucks and customers with tags, barcodes or low-power trackers. It cuts losses of returnable assets and shows dwell times at each site.

LogisticsRelated: Asset tracking, Geofence, Beacon

Parity (serial)

An extra bit in each serial character that lets the receiver detect single-bit errors: even, odd or none. Every device on a Modbus RTU line must use the same parity, or messages fail.

ProtocolsRelated: Baud rate, RS-485, UART

Parking sensor

A sensor in or above a parking bay that detects whether a vehicle is there, usually by magnetic field change, radar or both. Bay-level data feeds guidance signs, apps and enforcement.

Smart cityRelated: Magnetometer, Smart parking, LPWAN

Partial discharge monitoring

Detecting small electrical sparks inside the insulation of cables, transformers and switchgear, which signal ageing before a full breakdown. Sensors pick up the high-frequency, acoustic or ultrasonic signals these discharges make.

EnergyRelated: Condition monitoring, Medium voltage, Transformer monitoring

Particle counter (cleanroom)

An instrument that counts airborne particles by size, used to show that a cleanroom stays within its ISO 14644 class. Continuous counters in pharma and electronics plants raise alarms when counts climb.

ManufacturingRelated: PM2.5 and PM10, Cleanroom monitoring, Differential pressure

Passenger information display

A screen or sign at a stop or station showing departures, delays and messages, fed with real-time vehicle data. Monitoring its power, connection and content catches dark or frozen displays.

Smart cityRelated: Public transport priority, Heartbeat

Pasteurisation monitoring

Recording temperature and holding time in a pasteuriser to prove each batch reached the required heat treatment, such as 72 °C for 15 seconds in high-temperature short-time milk pasteurisation. Diversion valves and records are checked for food safety.

ManufacturingRelated: Data logger, Interlock

Patch management

Finding, testing and installing software and firmware updates that fix flaws, and keeping track of which devices still lack them. In OT, patches are often staged and timed around production to avoid disruption.

SecurityRelated: OTA, Firmware, Vulnerability management

Path loss

The reduction of radio signal strength between transmitter and receiver, from distance, obstacles and absorption. It is the largest term in a link budget and grows with frequency, which is one reason sub-GHz radios reach further.

ConnectivityRelated: Link budget, FSPL

Payload

The actual data inside a message, without the protocol’s headers. LoRaWAN payloads are usually a few bytes of packed binary; IP devices often send JSON.

Data and analyticsRelated: Codec, JSON, Uplink

Payload encryption

Encrypting the content of a message end to end, separately from the transport link. In LoRaWAN the application payload is encrypted with its own key, so the network operator can route it but not read it.

SecurityRelated: AES-128, Session keys, TLS

Peak demand

The highest power drawn by a site or network over a period, often measured as the highest 15-minute average. It sizes connections and transformers and often drives part of the electricity bill.

EnergyRelated: Maximum demand, Demand charge, Load factor

Peak shaving

Lowering the highest power peaks of a site, by shifting or stopping loads or by using batteries or generators at peak times. It cuts demand charges.

EnergyRelated: Demand charge, Load profile

Penetration test

An authorised, simulated attack on a system to find weaknesses before real attackers do. For IoT it covers devices, radio links, APIs, apps and the cloud platform, and its findings feed fixes and retests.

SecurityRelated: Vulnerability management, IEC 62443, Threat model

People counting

Counting people entering, leaving or present in a space, with sensors such as thermal arrays, time-of-flight, radar or cameras. Buildings use the counts for cleaning, ventilation, space planning and occupancy limits.

BuildingsRelated: Occupancy sensor, PIR sensor, Demand-controlled ventilation

PER (packet error rate)

The share of packets received with errors or lost, out of all sent. It is a direct measure of link quality and rises quickly as a radio link nears the edge of its range.

ConnectivityRelated: Packet loss, SNR, Link budget

Performance (OEE)

The OEE factor that compares actual output with the output possible at the ideal cycle time during run time. Slow cycles and short stops that are not recorded as downtime lower it.

ManufacturingRelated: OEE, Availability, Takt time

Performance ratio (PV)

The ratio of a solar plant’s actual energy output to what it would produce at its rated power under the measured sunlight. Typical values are about 0.75 to 0.9; a falling ratio points to soiling, faults or shading.

EnergyRelated: PV (photovoltaic) system

Perishable goods monitoring

Recording temperature, and sometimes humidity and door openings, for food, flowers or medicines from producer to shelf. Alerts during transport give time to act before goods spoil, and the record supports claims and audits.

LogisticsRelated: Cold chain, Temperature excursion, MKT

Pest trap monitoring

Remote traps with cameras or counters that report insect or rodent catches, so growers and food sites see pressure building without checking every trap by hand. Counts over a threshold trigger treatment or inspection.

AgricultureRelated: Precision agriculture, Threshold, LPWAN

pH sensor

A sensor that measures how acidic or alkaline water is on the 0–14 pH scale, usually with a glass electrode. It drifts and needs regular calibration with buffer solutions, which monitoring should remind people to do.

WaterRelated: ORP, Water quality monitoring, Calibration

Phase imbalance

Unequal voltages or currents on the three phases of a supply. It overheats motors and transformers and wastes energy, so three-phase meters report the imbalance as a percentage.

EnergyRelated: Energy meter, Power quality

Phase unbalance

Unequal voltages or currents on the three phases of a supply. Even a few percent of voltage unbalance makes three-phase motors run hotter, so it is a standard reading in power quality monitoring.

EnergyRelated: Power quality, Energy meter, VFD

Photoelectric sensor

A sensor that detects objects by a light beam being interrupted or reflected. It counts products on conveyors, checks presence at stations and is a common input for production counters.

Devices and sensorsRelated: Proximity sensor, Digital input, Pulse counter

Pick-to-light

A picking system in which lights on shelf locations show workers which item to take and how many, confirmed by a button press. It speeds up order picking and assembly kitting and reduces errors.

LogisticsRelated: Poka-yoke, MES, Digital input

PICV (pressure-independent control valve)

A valve that holds the flow to a heating or cooling coil steady whatever the pressure in the pipework, and also controls it. It makes hydronic systems easier to balance and saves pump energy.

BuildingsRelated: VAV, HVAC, AHU

PID controller

A control loop that adjusts an output, such as a valve or a pump speed, to keep a measured value at its setpoint, using proportional, integral and derivative terms. It runs in the local controller.

Automation and controlRelated: Setpoint, PLC, VFD

PID tuning

Choosing the proportional, integral and derivative settings of a PID controller so the process settles quickly without overshoot or oscillation. Poor tuning shows up in trends as hunting valves and wasted energy.

Automation and controlRelated: PID controller, Process variable, Setpoint

Piezoelectric sensor

A sensor using materials that produce a voltage when squeezed or strained. Piezoelectric accelerometers are standard for machine vibration because they handle high frequencies, and piezo elements can also harvest small amounts of energy.

Devices and sensorsRelated: Vibration monitoring, Accelerometer, Energy harvesting

Piezometer

An instrument that measures groundwater pressure or water level in a borehole or soil. Dams, mines and embankments use networks of piezometers to watch pore pressure for stability.

WaterRelated: Pressure transmitter, Level sensor, Data logger

Pipe freeze protection

Preventing pipes and coils from freezing, with temperature sensors, trace heating, frost thermostats or pump runs. Remote alerts on low temperatures in unheated spaces avoid burst pipes and water damage.

BuildingsRelated: Threshold, Plant room monitoring, Leak detection

Pipeline leak detection

Finding leaks in oil, gas or water pipelines from pressure, flow balance, acoustic or fibre-optic measurements. Comparing inflow and outflow, or watching for sudden pressure drops, can locate a leak within minutes.

EnergyRelated: Leak detection, Pressure transmitter, Flow meter

PIR sensor (passive infrared)

A sensor that detects changes in infrared radiation caused by warm bodies moving across its field of view. It draws very little power, so it is the usual presence and motion sensor in battery devices.

Devices and sensorsRelated: Motion sensor, Occupancy sensor, Battery life

PKI (public key infrastructure)

The certificates, authorities and rules that let devices and servers prove who they are with key pairs. A device PKI issues, renews and revokes device certificates.

SecurityRelated: X.509 certificate, mTLS, Firmware signing

Planned downtime

Time a machine is deliberately stopped for maintenance, changeovers or breaks. OEE separates it from unplanned stops; recording stop reasons shows where production time really goes.

ManufacturingRelated: OEE, Availability, Preventive maintenance

Plant room monitoring

Watching the equipment rooms of a building, such as boilers, chillers, pumps, tanks and water heaters, for temperatures, pressures, leaks and faults. It catches problems in rooms people rarely visit.

BuildingsRelated: BMS, Leak detection, Chiller

PLC (programmable logic controller)

A rugged industrial computer that reads inputs, runs a control program in a fixed cycle and drives outputs. PLCs run machines and processes; SCADA and IoT systems watch and steer them.

Automation and controlRelated: IEC 61131-3, SCADA, Interlock

PLC scan cycle

The repeating loop in which a PLC reads its inputs, runs its program and writes its outputs, typically every few to a few hundred milliseconds. Signals shorter than the scan time can be missed unless captured by fast inputs.

Automation and controlRelated: PLC, IEC 61131-3, Digital input

Plug and play

Devices that are recognised and configured automatically when connected, without manual setup. In IoT it usually means a device that, once powered, claims its identity and fetches its settings from the platform.

Devices and sensorsRelated: Zero-touch provisioning, Provisioning, Device profile

PM2.5 and PM10 (particulate matter)

Airborne particles smaller than 2.5 or 10 micrometres, harmful when breathed in. Indoor and outdoor air-quality sensors report them in micrograms per cubic metre, usually with optical sensors that need humidity correction.

Smart cityRelated: NO₂ (nitrogen dioxide) monitoring, Air quality sensor, IAQ

PoE (Power over Ethernet)

Sending power and data over the same Ethernet cable, so cameras, access points and sensors need no separate power supply. The switch or an injector supplies the power, and one cable to a ceiling or a pole replaces two.

Devices and sensorsRelated: Wi-Fi, Gateway

Poka-yoke (error-proofing)

A lean manufacturing method that makes mistakes impossible or immediately visible, such as a fixture that only fits one way or a sensor that stops the line when a part is missing. Sensor signals from such checks also give quality data.

ManufacturingRelated: Interlock, Machine vision, MES

Polarisation (antenna)

The orientation of a radio wave’s electric field, such as vertical or horizontal. Antennas at both ends should share the same polarisation; a mismatch can cost much of the signal.

ConnectivityRelated: Antenna, Link budget, Path loss

Polling

Asking devices for their values at fixed intervals, as a Modbus master or an SNMP manager does. It is simple and predictable but sends traffic even when nothing has changed.

In Hermetry Hermetry can poll devices that cannot connect themselves, such as SNMP agents, through protocol endpoints. More about Polling

Data and analyticsRelated: Report by exception, Modbus RTU, SNMP

Poultry house climate monitoring

Measuring temperature, humidity, ammonia, carbon dioxide and ventilation in poultry houses, where young birds are very sensitive to climate. Alarms on ventilation or heating failure must reach someone within minutes.

AgricultureRelated: Precision livestock farming, Alarm, HVAC

Power budget

An estimate of a device’s energy use, adding sleep current, sensor readings, radio transmissions and other activity over a day. It shows which part of the design drains the battery and how long the battery will last.

Devices and sensorsRelated: Battery life, Sleep mode, Duty cycle

Power factor

The ratio of real power to apparent power in an AC circuit, between 0 and 1. A low power factor means more current for the same work, and utilities often charge for it.

In Hermetry The energy meter use case shows power factor alarms on site meters in Hermetry. More about Power factor

EnergyRelated: Energy meter, THD, CT

Power line communication (PLC)

Sending data over existing electricity cables instead of separate wiring or radio. Smart meters and street lighting controllers often use it, though noise on the grid can limit reliability.

ConnectivityRelated: Smart meter, Smart lighting

Power quality

How closely a supply’s voltage and current match their ideal form: steady voltage, correct frequency, low harmonics and few dips or interruptions. Poor power quality trips machines, damages electronics and wastes energy.

EnergyRelated: THD, Phase imbalance, Voltage sag

Precision agriculture

Managing fields zone by zone instead of uniformly, using data on soil, weather, crop health and machinery positions. Sensors, GNSS-guided machines and satellite images let farmers vary water, seed and fertiliser where they are needed.

AgricultureRelated: Soil moisture sensor, GNSS, Irrigation controller

Precision livestock farming

Using sensors on animals and in barns, such as collars, scales, feeders and climate sensors, to monitor health, feeding and welfare individually. Early signs of illness or heat stress can be seen in the data before they are visible by eye.

AgricultureRelated: Precision agriculture, Geofence, Poultry house climate monitoring

Predictive maintenance

Servicing equipment when data shows it is wearing, rather than on a fixed schedule or after it breaks. Vibration, temperature and current trends are the usual signs.

OperationsRelated: Condition monitoring, Preventive maintenance, Anomaly detection

Prepaid metering

Metering in which customers pay for electricity, gas or water in advance and the meter supplies until the credit runs out. Smart prepaid meters receive top-ups and tariffs remotely and warn when credit is low.

EnergyRelated: Smart meter, MDM, Downlink

Pressure management

Lowering and steadying pressure in a water network, mostly at night, with pressure-reducing valves controlled by time or flow. It cuts leakage and pipe bursts and is a main tool against non-revenue water.

WaterRelated: NRW, Night flow

Pressure transmitter

A sensor that measures pressure and sends it as a standard signal such as 4–20 mA, 0–10 V or a digital protocol. It is one of the most common instruments in water, oil, gas and process plants.

Devices and sensorsRelated: Current loop, Differential pressure, Scaling

Pressure zone

A part of a water network supplied at one pressure level, separated from others by valves, pumps or reservoirs at different heights. Zones keep pressure within limits across hilly terrain.

WaterRelated: DMA, Pumping station

Preventive maintenance

Servicing equipment on a schedule, by time, by run hours or by cycles, to prevent failures. Counting real run hours instead of calendar time avoids servicing machines that hardly ran.

OperationsRelated: Predictive maintenance, Work order, MTBF

Primary cell (non-rechargeable battery)

A battery made to be used once, such as lithium thionyl chloride cells common in meters and sensors. They store a lot of energy and self-discharge slowly, but handle high pulse currents poorly without a buffer capacitor.

Devices and sensorsRelated: Battery life, Nominal capacity

Privacy by design

Building data protection into a system from the start: collecting only what is needed, keeping it no longer than necessary and limiting who can see it. Data protection laws such as the GDPR expect it, including for sensors that can reveal people’s behaviour.

SecurityRelated: Pseudonymisation, Data retention, RBAC

Private key

The secret half of a public-key pair, used to sign data or decrypt it. A device’s private key should be generated on the device or in a secure element and never leave it.

SecurityRelated: Public-key cryptography, X.509 certificate, Secure element

Private network (private LTE/5G)

A cellular network built for one organisation’s site, such as a port, mine or factory, with its own coverage and capacity. It gives devices reliable connectivity and keeps traffic on site.

ConnectivityRelated: NR, Network slicing, Cellular IoT

Process control

Keeping a physical process such as temperature, flow, level or pressure at the desired value by measuring it and adjusting valves, pumps or heaters. It ranges from simple on/off loops to multi-variable optimisation.

Automation and controlRelated: PID controller, Setpoint, Process variable

Process variable (PV)

The measured value a control loop is trying to keep at its setpoint, such as a tank level or a room temperature. Trends of PV, setpoint and controller output together show how well the loop works.

Automation and controlRelated: Setpoint, PID controller, Process control

PROFIBUS

A long-established fieldbus for factory and process automation, standardised in IEC 61158. PROFIBUS DP connects controllers to remote I/O and drives, and PROFIBUS PA reaches field instruments in hazardous areas.

ProtocolsRelated: Fieldbus, PROFINET, RS-485

PROFINET

An industrial Ethernet standard for real-time communication between controllers and field devices in automation. It carries cyclic I/O data with tight timing as well as diagnostics and parameters over standard Ethernet cabling.

ProtocolsRelated: EtherNet/IP, Fieldbus, PLC

Proof of delivery (ePOD)

A record that goods reached the right place, such as a signature, photo, scan or GNSS position at hand-over. Linked with temperature or shock data, it shows not only that something arrived but in what condition.

LogisticsRelated: Asset tracking, Cold chain, GNSS

Protocol Buffers

A compact binary format for structured data, defined by a schema that both sides share. It produces much smaller messages than JSON, which saves bandwidth and power for devices that send often.

ProtocolsRelated: JSON, CBOR, Payload

Protocol converter

A device or software that translates between protocols, for example from Modbus RTU on a serial line to MQTT over the network. It is often the quickest way to connect brownfield equipment that speaks an older protocol.

Devices and sensorsRelated: Edge gateway, Gateway, Modbus RTU

Provisioning

Getting a device ready to work on a platform: creating its identity, giving it credentials and settings, and assigning it to an owner. At scale it is done in batches or by the device claiming itself.

In Hermetry Hermetry adds devices by hand, lets them register themselves with their profile’s provisioning key, or claims a device by its serial and claim code. More about Provisioning

OperationsRelated: Fleet management, X.509 certificate, NFC

Proximity sensor

A sensor that detects an object nearby without touching it, by inductive, capacitive, magnetic or optical means. Inductive proximity sensors on machines detect metal parts, end positions and shaft rotations.

Devices and sensorsRelated: Photoelectric sensor, Digital input, Pulse counter

Pseudonymisation

Replacing names and direct identifiers with codes, so data can be analysed without showing who it belongs to. The key linking codes to people is kept separately; pseudonymised data is still personal data under laws such as the GDPR.

SecurityRelated: Privacy by design, Data retention, RBAC

PSK (pre-shared key)

A secret placed on both ends of a connection in advance and used to authenticate or encrypt it, as in TLS-PSK or Wi-Fi home security. It is simpler than certificates but harder to rotate and to keep unique per device.

SecurityRelated: TLS, X.509 certificate, Session keys

PSM (power saving mode)

A cellular sleep mode in which an LTE-M or NB-IoT device stays registered to the network but switches its radio off for long periods, which gives years of battery life. While asleep the device cannot be reached; downlinks wait until it next wakes up to send.

ConnectivityRelated: LTE-M, NB-IoT

Pt100 (platinum resistance thermometer)

A resistance temperature detector made of platinum with 100 ohms at 0 °C, whose resistance rises steadily with temperature. It is accurate and stable, so it is the standard industrial temperature sensor; three- or four-wire connections cancel cable resistance.

Devices and sensorsRelated: NTC thermistor, Analog input

PTP (Precision Time Protocol)

A network time protocol, standardised as IEEE 1588, that synchronises clocks to within microseconds or better. Substations, motion control and measurement systems use it where NTP’s millisecond accuracy is not enough.

ProtocolsRelated: NTP, Timestamp, IEC 61850

Public cloud

Computing and storage rented from a provider and shared, logically separated, among many customers. IoT platforms run there for scale and easy access, while on-premises or private cloud set-ups suit strict data or network rules.

Data and analyticsRelated: On-premises, Data residency, Multi-tenancy

Public transport priority

Giving buses and trams green lights or shorter waits at junctions, triggered by vehicle position or a request message to the signal controller. It makes services more punctual without new lanes.

Smart cityRelated: Traffic signal controller, GNSS, Passenger information display

Public-key cryptography

Cryptography that uses a key pair: a public key anyone may know and a private key kept secret. It underpins certificates, TLS and firmware signing, letting devices prove identity without sharing secrets.

SecurityRelated: Private key, PKI, X.509 certificate

Publish-subscribe

A messaging pattern in which senders publish to topics and receivers subscribe to the topics they want, without knowing each other. A broker in the middle delivers the messages.

ProtocolsRelated: MQTT, Message broker, MQTT topic

PUE (power usage effectiveness)

A data-centre efficiency figure: total facility energy divided by the energy used by IT equipment. A PUE of 1.5 means half as much energy again goes on cooling, power conversion and lighting.

BuildingsRelated: Energy monitoring, Sub-metering, Chiller

Pulse counter

An input that counts pulses from a meter, where each pulse stands for a fixed amount, such as 10 litres or 1 Wh. The count times the pulse value gives the total.

Devices and sensorsRelated: Digital input, Flow meter, Totalizer

Pump curve

A graph of a pump’s flow against the head it delivers, usually with efficiency and power. Comparing live flow, pressure and power with the curve shows wear, blockage or a pump running far from its best point.

WaterRelated: Pumping station, VFD, Flow meter

Pumping station

A facility with pumps that lift or move water or wastewater, with controls, level sensors and often backup power. Remote monitoring of levels, pump runs, faults and energy is one of the most common water-utility IoT uses.

In Hermetry The pumping station use case reads reservoir level, pump states, pressures, flow and energy into Hermetry through a gateway in each station panel. More about Pumping station

WaterRelated: Pump curve, Level sensor, SCADA

Pumpjack (sucker rod pump)

The beam pumping unit on top of many oil wells that drives a rod pump downhole. Monitoring strokes, motor load and dynamometer cards shows pump wear, gas lock or a failed rod without sending crews to each well.

EnergyRelated: Condition monitoring, VFD, RTU

Purdue model

A reference architecture that arranges industrial systems in levels, from field devices and controllers up to site operations and business systems, with zones between them. It is widely used to plan network segmentation and where data may cross between OT and IT.

SecurityRelated: Network segmentation, ISA-95, OT security

Push notification

A message sent to a phone or browser by an app’s server, shown even when the app is not open. Alarm systems use push for fast alerts that a user can open straight into the right screen.

In Hermetry Hermetry’s push channel shows a notification on a member’s registered browsers and app installs even when Hermetry is not open. More about Push notification

OperationsRelated: Notification, Alarm, Escalation

PV (photovoltaic) system

A system of solar panels that converts sunlight into electricity, with inverters and often batteries. Monitoring tracks output, inverter faults and string currents so lost production is found quickly.

EnergyRelated: Performance ratio, MPPT

PWM (pulse-width modulation)

Switching an output on and off quickly and varying the share of on-time to control average power. It dims LEDs, sets fan and motor speeds and drives valves from simple digital outputs.

Devices and sensorsRelated: Digital output, VFD, MCU

See your own devices on Hermetry

Connect a first device, watch its readings live and set an alarm on it. Start free, or ask us to set it up with you.