IoT and SCADA terms starting with C include CoAP, CA, CSV and Codec. Each of the 65 entries has a plain definition, its topic and related terms, and how Hermetry handles it where it does.
Showing 0 terms on C · Clear
65 terms on this page · Search all 1,000 terms · Download the whole glossary (PDF, 1.8 MB, 80 pages)
C
CA (certificate authority)
The trusted party that issues and signs digital certificates, vouching that a public key belongs to a named device, server or person. A private CA lets an organisation issue certificates for its own devices.
In Hermetry Supported devices sign in with X.509 client certificates issued by Hermetry’s own certificate authority, with offline roots, renewal and revocation. More about CA
Calibration
Comparing an instrument with a more accurate reference and adjusting or correcting it so its readings are right. Calibrations are repeated at set intervals and recorded, often with traceability back to national standards.
CAN bus (controller area network)
A robust two-wire bus on which electronic units in vehicles and machines exchange short messages. Messages carry an identifier instead of an address, and every unit decides which identifiers it cares about.
Cathodic protection
Protecting buried or submerged steel, such as pipelines and tanks, from corrosion by making it the cathode of an electrochemical cell, with sacrificial anodes or an impressed current. Remote monitoring of rectifiers and test-point potentials replaces long drives to check them by hand.
In Hermetry The remote wellhead use case brings cathodic protection readings into Hermetry next to well and pipeline pressures. More about Cathodic protection
CBM (condition-based maintenance)
Maintaining equipment when its measured condition shows it is needed, rather than on a fixed calendar. Vibration, temperature, oil quality or run hours trigger the work.
CBOR (Concise Binary Object Representation)
A compact binary data format with the same kind of structure as JSON: numbers, text, arrays and maps. It is much smaller and faster to parse, which suits constrained devices, and is often used with CoAP.
Cell ID positioning
Estimating where a cellular device is from the identity of the base station it is connected to. It needs no extra hardware or power, but the accuracy is coarse, from a few hundred metres in cities to several kilometres in the country.
Cellular IoT
Devices that connect through mobile networks: LTE Cat 1, LTE-M, NB-IoT and 5G. It needs no private gateway, only coverage and a subscription, which makes it the usual choice for scattered sites.
CEMS (continuous emissions monitoring system)
Equipment that continuously measures pollutants such as sulphur dioxide, nitrogen oxides and dust in the flue gas of power plants and factories. Its data is used to prove that emission limits are kept.
Certificate pinning
Making a device accept only one specific certificate or key for its server, instead of any certificate a trusted authority has signed. It blocks some interception attacks but needs a plan for when the pinned certificate changes.
Certificate revocation
Declaring a certificate invalid before it expires, for example when a device is stolen or its key is exposed. Clients learn about revocations from revocation lists (CRLs) or online status checks (OCSP).
Certificate rotation
Replacing certificates and keys before they expire or whenever they may be exposed. Automating rotation across a fleet avoids devices going offline on the day a certificate runs out.
Checksum
A small value calculated from a block of data and sent with it, so the receiver can tell whether the data arrived intact. Simple checksums add or XOR the bytes; a CRC catches many more errors.
Child device (device behind a gateway)
A device that does not talk to the platform itself but through a gateway, for example a Modbus meter on the gateway’s RS-485 port. The gateway reports for it, and the platform shows it as a device of its own.
In Hermetry Hermetry turns each field device behind a gateway into a child device with its own readings, attributes, alarms and dashboards. More about Child device
Chiller
A machine that removes heat from a liquid, usually water, which then cools air handling units or processes. Key readings are supply and return water temperature, power and the coefficient of performance.
In Hermetry The building HVAC and energy use case watches chillers in Hermetry next to air handling units and meters. More about Chiller
Chlorine residual
The amount of free chlorine still left in drinking water after disinfection, measured in milligrams per litre. Utilities monitor it across the network because too little lets bacteria grow and too much causes taste complaints.
CHP (combined heat and power)
A plant that generates electricity and uses the heat that would otherwise be wasted, for heating buildings or processes. Monitoring output, run hours and efficiency shows whether it pays off.
CIP (Common Industrial Protocol)
An object-based application protocol for industrial automation that describes devices as objects with attributes and services. It is carried by EtherNet/IP and by older industrial networks.
Cipher suite
The set of algorithms a secure connection agrees on: how keys are exchanged, how data is encrypted and how integrity is checked. Old, weak suites should be switched off on servers and devices.
Circuit breaker
A switch that opens automatically when the current is too high, protecting cables and equipment, and can be reset afterwards. Monitoring breaker status and trips shows where faults happen and which circuits are overloaded.
Cleanroom monitoring
Continuous measurement of particle counts, pressure differences between rooms, temperature and humidity in cleanrooms, such as in medicine and electronics production. Records must be complete and tamper-evident because they prove each batch was made under the right conditions.
Clock drift
The gradual difference between a device’s clock and the real time, because no oscillator runs perfectly. A few seconds a day is common, so devices resynchronise from the network or a time server.
Cloud computing
Using computing, storage and services over the internet from a provider instead of running your own servers. IoT platforms often run in the cloud so they can grow with the number of devices without buying hardware.
Cloud-to-device message
A message sent from the platform to a device, such as a command, a new setting or a firmware notice. Devices that sleep receive these messages only when they next wake up and check in.
CMP (connectivity management platform)
Software for managing the SIM cards of a device fleet: activating and suspending them, watching data use, setting limits and finding devices that have stopped connecting. Such a platform is used where fleets have hundreds or thousands of SIMs, often with several operators.
CO₂ sensor
A sensor that measures carbon dioxide in parts per million, usually by how much infrared light the gas absorbs (NDIR). Indoors, CO₂ shows how well a room is ventilated for the people in it.
CO₂e (carbon dioxide equivalent)
A way to express different greenhouse gases as the amount of CO₂ that would warm the climate as much. Energy data from meters is turned into CO₂e with emission factors for carbon reporting.
CoAP (Constrained Application Protocol)
A light web protocol for very small devices, with GET, PUT, POST and DELETE like HTTP but over UDP and with tiny headers. It is the transport under LwM2M.
Codec (payload decoder)
A small piece of logic that turns a device’s compact binary payload into named values, such as bytes 01 0A 3F into "temperature 21.5". Every LoRaWAN sensor model needs one, because each packs its data differently.
In Hermetry Hermetry comes with a library of 106 codecs for common LoRaWAN sensors, and you can write your own. More about Codec
Coding rate
The share of extra bits a radio adds to correct errors, written as 4/5 to 4/8 in LoRa. More correction makes a frame sturdier against interference but longer on air.
Cold chain
The unbroken chain of refrigerated storage and transport that keeps food, vaccines and medicines within their temperature range from production to use. Data loggers and connected sensors prove the range was kept and raise an alarm when it is not.
Cold room
A walk-in refrigerated room for storing food or medicines. Typical monitoring covers air temperature, door openings, defrost cycles and the compressor, with alarms before the stock is at risk.
In Hermetry The cold room use case watches air and product temperatures, door contacts, defrost and compressor states in Hermetry. More about Cold room
Command (RPC)
An instruction sent from the platform to a device, such as "open valve 2" or "restart", often with a reply that says whether it worked. Good systems record who sent it and may require a second person to approve risky ones.
In Hermetry Hermetry stores every command as a request, follows its state until it ends or expires, and keeps a catalogue of the commands a device accepts. More about Command
Commissioning
Checking that a newly installed system works as designed before handing it over: every sensor reads correctly, every alarm reaches the right person and every command does what it should. Good commissioning records become the baseline for later troubleshooting.
In Hermetry While a device is being commissioned or maintained, Hermetry can mute its alarm notifications for up to 90 days; its alarms are still recorded. More about Commissioning
Compressed air monitoring
Measuring the flow, pressure and power of compressed air systems, one of the most expensive utilities in a factory. Flow at night or at weekends usually reveals leaks that can be fixed cheaply.
Condition monitoring
Watching the health of machines through readings such as vibration, temperature and current, so wear shows up before a breakdown. It is the data side of predictive maintenance.
Conductivity sensor
A sensor that measures how well water conducts electricity, in microsiemens per centimetre, which rises with the amount of dissolved salts. It is used for water quality, cooling towers and in irrigation, where it is often called EC.
Confirmed uplink
A LoRaWAN uplink that asks the network for an acknowledgement and is repeated if none comes. It costs gateway airtime for the reply, so it is kept for the few messages that must not be lost.
Connected worker
Giving field and factory staff connected devices, such as phones, wearables and tablets, so they receive alarms, instructions and data where they work, and so their safety can be watched when they work alone. The aim is faster response, fewer trips and safer work.
Constrained device
A device with little memory, processing power or energy, such as a battery sensor on a microcontroller. Protocols for such devices, like CoAP and CBOR, are designed to keep messages and code small.
Contactor
An electrically controlled switch for large loads such as motors, heaters and lighting circuits. A small control signal from a controller or relay closes it and switches the heavy current.
Container (software)
A package that holds an application with everything it needs to run, isolated from other applications on the same machine. Edge gateways use containers to run several independent applications and to update them safely.
Control loop
A cycle in which a controller measures a value, compares it with the setpoint and adjusts an output to close the gap, again and again. In a closed loop the measurement feeds back; in an open loop the output is set without checking the result.
Control valve
A valve that a controller moves to any position, not just open or closed, to regulate flow, pressure or level. Its position feedback and travel are useful signals for spotting wear and sticking.
Cooling tower
A structure that cools water by letting part of it evaporate into a stream of air, removing heat from buildings and industrial processes. Its water needs monitoring for conductivity, temperature and treatment to prevent scaling and bacteria.
COP (coefficient of performance)
Useful heat moved divided by electrical energy used, for a heat pump or a chiller. A COP of 4 means four units of heat for one unit of electricity; a falling COP often means fouled coils or a refrigerant problem.
Coriolis flow meter
A flow meter that measures the mass flow of a liquid or gas directly, from the way vibrating tubes twist as the fluid moves through them. It also measures density and is very accurate, but costs more than most other types.
Corrosion monitoring
Measuring how fast metal is being lost in pipes, tanks and structures, with probes, coupons or wall-thickness sensors. Trends tell when to inspect, treat or replace before a leak happens.
Counter rollover
What happens when a counter, such as a meter’s total or a pulse count, reaches its highest value and starts again from zero, for example after 65,535 in a 16-bit register. Consumption calculations must recognise rollover so a jump to zero is not read as a huge negative use.
COV (change of value)
A way for a device to send a value only when it changes by more than a set amount, instead of being asked again and again. BACnet uses COV subscriptions to cut network traffic.
Coverage dead zone
A place where a wireless network cannot be reached, such as a basement, a lift shaft or behind thick concrete. Site surveys before installation find dead zones so that antennas, repeaters or a different network can be planned.
Coverage enhancement
Modes of LTE-M and NB-IoT in which a device repeats its transmissions many times so that it can be heard deep indoors or underground. It extends reach at the cost of more airtime, latency and battery use.
CRA (Cyber Resilience Act)
A European Union regulation that sets cybersecurity requirements for products with digital elements sold in the EU, including connected devices and their software. Makers must design products securely, handle vulnerabilities and provide security updates; its obligations phase in from 2026 to 2027.
CRC (cyclic redundancy check)
An error-detecting code calculated from a block of data with polynomial division and sent along with it. It catches common transmission errors such as flipped bits and bursts, and Modbus RTU, for example, ends every frame with a 16-bit CRC.
Critical infrastructure
Systems a society depends on, such as power, water, transport, health and communications. Operators of critical infrastructure face stricter cybersecurity rules, such as the EU NIS2 directive.
Crop monitoring
Following the condition of crops with soil moisture, weather, leaf wetness and imaging data to decide when to irrigate, spray or harvest. Connected sensors turn field walks into alerts.
CSR (certificate signing request)
A message a device creates, holding its public key and identity, asking a certificate authority to issue a certificate. The private key never leaves the device, which is the point of the request.
CSS (chirp spread spectrum)
A radio modulation that sends each symbol as a chirp, a signal sweeping up in frequency. It can be received below the noise level and resists interference and Doppler shift, which is why it underlies LoRa.
CSV (comma-separated values)
A plain text format for tables: one line per row and a separator between columns. It is the common way to import device lists and export readings to spreadsheets.
In Hermetry Hermetry imports devices from CSV files and exports readings and lists as CSV. More about CSV
CT (current transformer)
A sensor that measures the current in a cable without cutting it, usually a ring or a split core around the conductor. Energy meters use CTs to measure circuits larger than they could carry themselves.
Current loop (4–20 mA)
The industrial standard for analog sensors: the sensor sets a current between 4 and 20 mA in proportion to its reading. Zero is 4 mA, so a reading of 0 mA means a broken wire, not a zero value.
Curtailment
Reducing generation or consumption on request, such as limiting a wind or solar plant’s output when the grid cannot take it, or cutting a factory’s load during a peak. Measured curtailment is often paid for.
Custody transfer
Measuring a product at the point where ownership changes hands, such as oil, gas or water sold between companies. These meters must meet strict accuracy and approval rules because the readings become invoices.
Cyber-physical system
A system in which computing and physical processes are tightly linked, so software decisions move real things and physical events change the software’s behaviour. Factories, power grids and connected vehicles are examples.
Cycle time
The time it takes to complete one unit or one operation, from start to finish. Comparing actual with ideal cycle time shows speed losses, one of the three parts of OEE.
See your own devices on Hermetry
Connect a first device, watch its readings live and set an alarm on it. Start free, or ask us to set it up with you.

