New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

IoT glossary: A

IoT and SCADA terms starting with A: ABP, Absolute, gauge and differential pressure, Accelerometer, Access control and 54 more, each with a plain definition.

IoT and SCADA terms starting with A include API, ABP, ADR and APN. Each of the 58 entries has a plain definition, its topic and related terms, and how Hermetry handles it where it does.

58 terms on this page · Search all 1,000 terms · Download the whole glossary (PDF, 1.8 MB, 80 pages)

A

ABP (activation by personalisation)

A way to put a LoRaWAN device on a network with its device address and session keys written into it in advance, so it never sends a join request. It is quick to set up, but the keys stay the same until someone changes them by hand, which makes OTAA the safer choice for most fleets.

In Hermetry Hermetry supports ABP devices, though OTAA is the usual choice. More about ABP

ConnectivityRelated: OTAA, Session keys, LoRaWAN

Absolute, gauge and differential pressure

Three ways to state a pressure. Absolute pressure is measured against a perfect vacuum, gauge pressure against the surrounding atmosphere, and differential pressure between two points. Mixing them up gives readings about one bar off, so a sensor’s type must match what the process needs.

Devices and sensorsRelated: Differential pressure, Sensor, Scaling

Accelerometer

A sensor that measures acceleration along one, two or three axes, usually as a small MEMS chip. IoT devices use it to detect movement, tilt, shocks and falls, and machines use it to measure vibration.

Devices and sensorsRelated: Vibration monitoring, Asset tracking, Condition monitoring

Access control

Deciding who may enter a place or use a system, and recording when they did. Physical access control uses badges, keypads and door controllers; logical access control uses accounts, roles and keys.

SecurityRelated: RBAC, Authentication, Authorisation, Audit log

Access point

A device that connects wireless clients to a wired network, most often for Wi-Fi. Industrial sites place access points so that machines and handhelds have coverage everywhere they move.

ConnectivityRelated: Wi-Fi, Gateway, Backhaul

Accuracy and precision

Accuracy is how close a reading is to the true value; precision is how close repeated readings are to each other. Datasheets often state accuracy as a percentage of the reading or of full scale, which makes a big difference at the low end of the range.

Devices and sensorsRelated: Calibration, Sensor drift, Sensor

Acknowledgement (alarm)

The step in which a person confirms they have seen an alarm. Acknowledging does not clear the alarm; it records who took it on and when, and usually stops repeat notifications while the condition is still present.

In Hermetry Operators acknowledge Hermetry alarms one by one or in bulk, add notes, and every step lands on the alarm’s timeline. More about Acknowledgement

Automation and controlRelated: Alarm, Alarm shelving, ISA-18.2

Acoustic monitoring

Listening to equipment or pipes with microphones or contact sensors to spot faults by sound, such as a leaking valve, a failing bearing or water escaping from a buried main. The sound is usually turned into features like level and frequency content before it is sent.

OperationsRelated: Leak detection, Vibration monitoring, Condition monitoring

Actuator

A device that turns a control signal into a physical action: opening a valve, moving a damper, starting a motor or switching a relay. Sensors tell a system what is happening; actuators let it do something about it.

Devices and sensorsRelated: Sensor, Relay, Control valve

Adaptive sampling

Changing how often a device measures or reports according to what is happening, for example every hour when a tank level is steady and every minute while it is filling. It saves battery and data without missing the moments that matter.

Data and analyticsRelated: Sampling rate, Report by exception, Battery life

ADC (analog-to-digital converter)

The circuit that turns an analogue voltage into a number a processor can use. Its resolution in bits sets how fine the steps are: a 12-bit converter divides its range into 4,096 steps.

Devices and sensorsRelated: Analog input, Sampling rate, Scaling

ADR (adaptive data rate)

A LoRaWAN mechanism in which the network server tells a device which data rate and transmit power to use, based on how well its recent uplinks were received. Devices close to a gateway then send faster and use less airtime and battery.

In Hermetry Hermetry’s network server runs ADR and sends the MAC commands for it. More about ADR

ConnectivityRelated: Data rate, Spreading factor, MAC command

AES-128

A symmetric block cipher with a 128-bit key, standardised as the Advanced Encryption Standard. LoRaWAN uses it to encrypt payloads and to compute the message integrity code, and many sensors use it for their own payload encryption.

SecurityRelated: MIC, Session keys, TLS

Agent (device agent)

A piece of software on a device or gateway that keeps the connection to a platform, sends data, carries out commands and installs updates. A good agent recovers on its own after a power cut or a lost network.

OperationsRelated: Edge gateway, OTA, Heartbeat

AHU (air handling unit)

The part of a building’s HVAC system that takes in air, filters it, heats or cools it and pushes it through the ducts. Typical readings are supply and return temperature, filter pressure drop, fan speed and damper position.

BuildingsRelated: HVAC, BMS, VAV

AIoT (artificial intelligence of things)

The combination of connected devices with artificial intelligence, so that data from sensors is used to recognise patterns, predict faults or decide actions. The intelligence can run in the cloud, on a gateway or on the device itself.

Data and analyticsRelated: Edge AI, Anomaly detection, Predictive maintenance

Air gap

Keeping a network physically separated from all other networks, often done for safety and control systems. In practice gaps are often bridged by USB sticks, laptops or remote-access links, so an air gap needs rules and checks as well as cables.

SecurityRelated: Data diode, OT, Defence in depth

Air quality sensor

A sensor that measures pollutants or indicators of air quality, such as CO₂, volatile organic compounds, fine particles (PM2.5 and PM10), nitrogen dioxide or ozone. Indoors it guides ventilation; outdoors it feeds pollution maps and alerts.

Devices and sensorsRelated: CO₂ sensor, AQI, HVAC

Alarm

A record that something is abnormal: a reading out of range, a device that stopped reporting, a fault signal. An alarm usually has a severity, opens when its condition is met and clears when the condition goes away.

In Hermetry Alarm rules on a device profile open and clear alarms, each with one of five severities, a status (open, acknowledged, resolved) and a timeline. More about Alarm

Automation and controlRelated: Acknowledgement, Alarm flood, Threshold, Hysteresis

Alarm escalation

Passing an alarm on to the next person or channel when nobody responds in time, for example from the on-call technician by app to the supervisor by phone after 15 minutes. Escalation makes sure an alarm cannot be silently missed.

Automation and controlRelated: Alarm, Acknowledgement, Alarm priority

Alarm flood

A burst of more alarms than an operator can handle, typically ten or more in ten minutes for one person. Floods hide the alarm that matters and usually point to missing deadbands, repeated alarms for one cause or alarms with no action behind them.

In Hermetry Hermetry’s alarm settings protect people from floods with a repeat window and storm digests. More about Alarm flood

Automation and controlRelated: Alarm, Deadband, ISA-18.2

Alarm management

The work of designing, operating and reviewing alarms so that operators get only alarms that need an action, with the right priority. Standards such as ISA-18.2 and IEC 62682 describe it as a lifecycle, from philosophy to regular audits.

Automation and controlRelated: ISA-18.2, Alarm rationalisation, Alarm flood

Alarm priority

The rank of an alarm, such as critical, high, medium or low, based on how serious the consequence is and how quickly someone must act. When most alarms are high priority, priority stops meaning anything, so good practice keeps the top levels rare.

Automation and controlRelated: Alarm, Alarm management, Alarm escalation

Alarm rationalisation

Reviewing every alarm one by one: what causes it, what happens if nobody acts, what the operator should do, its priority and its limit. Alarms with no clear action are removed or turned into events.

Automation and controlRelated: Alarm management, ISA-18.2, Alarm priority

Alarm shelving

Putting an alarm aside for a set time, for example while a known fault is being repaired, so it stops demanding attention without being deleted. A shelved alarm returns when the time runs out.

In Hermetry Hermetry mutes a device’s alarm notifications for up to 90 days, for example during maintenance; the alarms are still opened and recorded. More about Alarm shelving

Automation and controlRelated: Alarm, Acknowledgement

Alarm suppression

Automatically holding back alarms that are expected in the current situation, for example low-flow alarms while a pump is stopped for maintenance. Unlike shelving, which a person does by hand, suppression follows rules based on the state of the plant.

Automation and controlRelated: Alarm shelving, Alarm flood, Interlock

Ambient IoT

An emerging class of very low-cost devices that have no battery and run on energy harvested from radio waves, light or motion, sending data by reflecting signals. Mobile network standards are adding support for it so such tags can be read across large areas.

ConnectivityRelated: Backscatter communication, Energy harvesting, RFID

AMI (advanced metering infrastructure)

A complete two-way metering system: smart meters, the network that links them and the head-end software that collects their data. Besides frequent readings it supports remote connect and disconnect, tariff changes and outage alerts.

EnergyRelated: Smart meter, AMR

AMQP (Advanced Message Queuing Protocol)

An open standard protocol for passing messages between applications through queues, with delivery guarantees and routing. It is common between back-end systems, while constrained devices more often use MQTT or CoAP.

ProtocolsRelated: MQTT, Publish-subscribe, Message broker

AMR (automatic meter reading)

Reading meters without visiting each one by hand, using walk-by, drive-by or fixed radio networks. Unlike AMI, classic AMR is one-way: the meter sends readings but cannot receive commands.

EnergyRelated: AMI, Drive-by meter reading, Smart meter

Analog input

An input that reads a continuous signal, such as a 4–20 mA current loop or a 0–10 V voltage, and turns it into a number. The number is then scaled to the engineering unit of the sensor, for example bar or °C.

Devices and sensorsRelated: Current loop, Digital input, Scaling

Anemometer

An instrument that measures wind speed, often together with direction. Cup and vane designs have moving parts, while ultrasonic anemometers measure the travel time of sound and need little maintenance.

Devices and sensorsRelated: Weather station, Sensor

Anomaly detection

Finding readings or patterns that do not fit the usual behaviour, such as a night consumption that is higher than every other night. It can be as simple as a band around a moving average or as complex as a trained model.

Data and analyticsRelated: Predictive maintenance, Threshold, Time series

Antenna

The part of a radio that turns electrical signals into radio waves and back. Its type, size and position often matter more for range than the radio itself: an antenna inside a metal cabinet can lose most of the signal.

ConnectivityRelated: Antenna gain, Link budget, Attenuation

Antenna gain

How strongly an antenna focuses its energy in one direction compared with an ideal antenna that radiates equally everywhere, stated in dBi. More gain reaches further in the favoured direction but less well elsewhere, and regulations cap the total radiated power.

ConnectivityRelated: dBi, Antenna, Link budget

APC (advanced process control)

Control methods that sit above basic PID loops and coordinate several of them, often using a model of the process to predict its behaviour. APC keeps a plant closer to its best operating point, saving energy and raw material.

Automation and controlRelated: PID controller, Control loop, DCS

API (application programming interface)

A defined way for one program to ask another for data or actions. In IoT, platforms usually offer a REST API for people and systems and a device API (often MQTT or HTTP) for devices.

In Hermetry Hermetry offers a management REST API, webhooks and MCP servers for your own systems, alongside the device API. More about API

Data and analyticsRelated: REST API, Webhook, API key

API gateway

A service that sits in front of a set of APIs and handles the common work for all of them: checking keys, limiting request rates, routing and logging. Clients talk to one address instead of many.

Data and analyticsRelated: API, REST API, API key

API key

A secret string that identifies a program calling an API. Good practice is one key per integration, with only the rights it needs, an expiry date and the option to revoke it at any time.

In Hermetry Hermetry API keys carry only the permissions you give them and can be pinned to networks, given an expiry and rotated. More about API key

SecurityRelated: API, RBAC, REST API

APM (asset performance management)

Software and practice for keeping physical assets reliable at the lowest cost, combining condition data, failure history and risk to decide when and how to maintain each asset. It helps decide where maintenance money brings the most reliability.

OperationsRelated: Predictive maintenance, CBM, Asset management

APN (access point name)

The name a cellular device uses to choose the data network it connects through. A private APN can keep device traffic off the public internet and give devices fixed private addresses.

In Hermetry A router on its own SIM connects to Hermetry with the APN set on the router itself; Hermetry needs no special setting for it. More about APN

ConnectivityRelated: Cellular IoT, SIM, eSIM

AppKey

In LoRaWAN 1.0.x, the root key a device shares with the network for over-the-air activation; fresh session keys are derived from it at every join. LoRaWAN 1.1 adds a separate network root key. Root keys must never be sent in clear text or reused across devices.

In Hermetry You register a LoRaWAN device that joins over the air in Hermetry with its DevEUI, JoinEUI and AppKey. More about AppKey

SecurityRelated: OTAA, Session keys, Join procedure

Application server (LoRaWAN)

In a LoRaWAN network, the component that decrypts application payloads and passes the data on to the user’s systems. The network server handles the radio side and forwards each message to the right application server.

ConnectivityRelated: Network server, LoRaWAN, Session keys

AQI (air quality index)

A single number that summarises how polluted the air is, calculated from the concentrations of several pollutants and shown in colour bands with health advice. Different countries use different formulas and bands, so indexes are not directly comparable.

Smart cityRelated: Air quality sensor

Asset hierarchy

A tree that organises assets from the top down, such as company, site, area, line, machine and component. It lets data roll up from a single sensor to a whole plant and lets people find things where they expect them.

In Hermetry In Hermetry Twin the asset hierarchy is a tree of sites, buildings, floors, rooms, lines and machines, and devices are placed on its assets. More about Asset hierarchy

Data and analyticsRelated: ISA-95, Zone, Data model

Asset management

Managing physical assets over their whole life, from purchase through operation and maintenance to disposal, to get the most value at acceptable risk. ISO 55000 describes it as a management system.

OperationsRelated: APM, Asset tracking, Work order

Asset tracking

Knowing where movable things are and in what state: containers, tools, vehicles, people’s badges. Location comes from GNSS outdoors or from radio beacons and gateways indoors, often with temperature or shock readings alongside.

OperationsRelated: GNSS, Geofence, Beacon

Asset utilisation

The share of available time an asset is actually used productively, such as hours a machine runs or days a container is in transit. Low utilisation shows where equipment can be shared, moved or sold.

OperationsRelated: OEE, Asset tracking, KPI

AT commands

Short text commands, each beginning with "AT", used to control cellular modems and some other radio modules: to check signal, attach to a network or send data. The convention dates back to early dial-up modems and is still used by most modules.

Devices and sensorsRelated: Cellular IoT, UART, APN

ATEX

The European rules for equipment and work in potentially explosive atmospheres, such as gas in refineries or dust in grain silos. Areas are divided into zones by how often an explosive atmosphere occurs, and devices installed there must be certified for that zone.

StandardsRelated: IP rating, SIL

ATS (automatic transfer switch)

A switch that moves an electrical load from the normal supply to a backup, such as a generator, when the normal supply fails, and back again when it returns. Monitoring its position and transfers shows how often a site runs on backup.

EnergyRelated: UPS, Generator monitoring, Redundancy

Attack surface

All the points where an attacker could try to get in: open ports, services, interfaces, user accounts, debug connectors and update channels. Shrinking it, by closing what is not needed, is one of the cheapest security measures.

SecurityRelated: Defence in depth, Zero trust, IEC 62443

Attenuation

The loss of signal strength as it travels, through distance, walls, water, vegetation, cables and connectors. It is measured in decibels, and every added decibel of loss shortens the range of a radio link.

ConnectivityRelated: Link budget, dBm, Antenna

Audit log

A tamper-evident record of who did what and when: sign-ins, changed settings, sent commands, approved actions. It answers questions after an incident and is often required by security standards.

In Hermetry Hermetry’s audit log records sign-ins, member and role changes, key changes, high-impact commands and more, with a hash chain check. More about Audit log

SecurityRelated: RBAC, IEC 62443

Authentication

Proving who or what you are: a person with a password and a second factor, a device with a certificate or key, a program with an API key. Authentication comes before authorisation, which decides what you may then do.

SecurityRelated: Authorisation, mTLS, SSO

Authorisation

Deciding what an authenticated person, device or program is allowed to do, such as read data, change settings or send commands. Roles and policies keep authorisation consistent across many users.

SecurityRelated: Authentication, RBAC, API key

Automation pyramid

A model of industrial systems in levels: field devices at the bottom, then control (PLCs), supervision (SCADA), manufacturing operations (MES) and business planning (ERP) at the top. IIoT platforms often connect several levels directly instead of passing data up one layer at a time.

Automation and controlRelated: ISA-95, SCADA, MES, PLC

Availability

The share of planned time that a machine or system is actually able to run. In OEE it is run time divided by planned production time; for IT services it is usually stated as a percentage of uptime.

OperationsRelated: OEE, MTBF, MTTR

See your own devices on Hermetry

Connect a first device, watch its readings live and set an alarm on it. Start free, or ask us to set it up with you.