New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

IoT glossary: 0–9

IoT and SCADA terms starting with 0 to 9: 0–10 V signal, 2.4 GHz band, 2FA, 2G and 3G switch-off and 6 more, each with a plain definition.

IoT and SCADA terms starting with 0 to 9 include 5G, 2FA, 4G and 6LoWPAN. Each of the 10 entries has a plain definition, its topic and related terms, and how Hermetry handles it where it does.

10 terms on this page · Search all 1,000 terms · Download the whole glossary (PDF, 1.8 MB, 80 pages)

0–9

0–10 V signal

An analogue control or measurement signal in which a voltage between 0 and 10 volts stands for the range of a value, such as 0 to 100 % damper position or lamp brightness. It is common in building automation because it is simple, but a long cable lowers the voltage that arrives, which a 4–20 mA loop does not suffer from.

Devices and sensorsRelated: Current loop, Analog input, Actuator

2.4 GHz band

A licence-free radio band available almost worldwide, used by Wi-Fi, Bluetooth, Zigbee and Thread. It allows faster data than sub-gigahertz bands but is crowded and passes through walls less well, so ranges are shorter.

ConnectivityRelated: ISM band, Wi-Fi, BLE, Zigbee

2FA (two-factor authentication)

Signing in with two different kinds of proof, typically a password plus a code from an app or a security key. A stolen password alone is then not enough to take over the account. See also multi-factor authentication.

In Hermetry Hermetry supports passkeys and one-time codes as second factors, and can require two-step verification for an organisation. More about 2FA

SecurityRelated: MFA, TOTP

2G and 3G switch-off

Mobile operators are switching off their 2G and 3G networks to reuse the radio spectrum for 4G and 5G. Devices that can only use those networks, such as older alarm panels, meters and trackers, stop working when the network in their area goes off, so fleets need a plan to move to LTE-M, NB-IoT or 4G.

ConnectivityRelated: GSM, LTE-M, NB-IoT, Cellular IoT

3GPP (3rd Generation Partnership Project)

The partnership of telecommunications standards bodies that writes the specifications for mobile networks, from GSM to 5G. Its work comes out in numbered releases; NB-IoT and LTE-M arrived in Release 13 and RedCap in Release 17.

StandardsRelated: 5G, NB-IoT, LTE-M, RedCap

4–20 mA

The most common analogue signal in industrial instruments: a current of 4 mA stands for the bottom of the range and 20 mA for the top. See current loop for how it works and why the live zero at 4 mA matters.

Devices and sensorsRelated: Current loop, Analog input, Scaling

4G (LTE)

The fourth generation of mobile networks, based on Long Term Evolution. Besides fast phone data it carries the IoT device categories LTE-M and NB-IoT and the low-rate Cat 1 used by many gateways and trackers.

ConnectivityRelated: LTE Cat 1, LTE-M, NB-IoT, 5G

5G

The fifth generation of mobile networks. It is designed for three kinds of use: fast mobile broadband, ultra-reliable low-latency links for control, and massive numbers of simple devices. For most IoT today that last role is filled by NB-IoT and LTE-M, which are recognised as 5G technologies, while RedCap serves mid-range devices.

ConnectivityRelated: RedCap, NB-IoT, LTE-M, 3GPP

6LoWPAN (IPv6 over low-power wireless personal area networks)

An adaptation layer that lets IPv6 packets travel over small, low-power radios such as IEEE 802.15.4 by compressing headers and splitting large packets. It gives every tiny sensor its own IP address and is the basis of Thread networks.

ProtocolsRelated: Thread, Border router, Mesh network

868 MHz and 915 MHz bands

The licence-free sub-gigahertz radio bands most used by LPWAN devices: around 868 MHz in Europe and around 915 MHz in the Americas and some other regions. Each region has its own rules, such as duty-cycle limits in Europe and frequency hopping or dwell-time limits in the Americas, which is why devices are built for a regional frequency plan.

ConnectivityRelated: ISM band, Frequency plan, Duty cycle, LoRaWAN

See your own devices on Hermetry

Connect a first device, watch its readings live and set an alarm on it. Start free, or ask us to set it up with you.