IoT and SCADA terms starting with B include BLE, BACnet, BMS and Backoff. Each of the 39 entries has a plain definition, its topic and related terms, and how Hermetry handles it where it does.
Showing 0 terms on B · Clear
39 terms on this page · Search all 1,000 terms · Download the whole glossary (PDF, 1.8 MB, 80 pages)
B
Backhaul
The link that carries a gateway’s traffic to the network or the cloud, such as Ethernet, cellular or satellite. A gateway with a weak backhaul can hear every sensor and still lose their data.
Backoff (retry)
Waiting before trying again after a failed connection or message, usually waiting longer after each failure and adding a random delay. Without it, thousands of devices reconnecting at the same moment after an outage can overload the server they are trying to reach.
In Hermetry Hermetry’s docs tell firmware authors what a device receives when a connection is refused or ended, and how long it should wait before trying again. More about Backoff
Backscatter communication
Sending data by reflecting an existing radio signal and changing how much is reflected, instead of producing a signal of one’s own. It needs very little power, which is how passive RFID tags and battery-less sensors work.
BACnet
A standard data communication protocol for building automation, used by HVAC, lighting and access systems. It runs over IP networks (BACnet/IP) or over RS-485 serial lines (BACnet MS/TP).
In Hermetry Hermetry Edge, on the gateways Hermetry supports, can read BACnet/IP devices, depending on the gateway model. More about BACnet
BACnet object
The way BACnet describes the data of a device: as objects of standard types, such as Analog Input, Binary Output or Schedule, each with properties like Present Value and Status Flags. A client reads and writes those properties instead of raw registers.
BACnet/SC (Secure Connect)
A newer way to carry BACnet traffic over encrypted, certificate-authenticated connections, using secure WebSocket links through a hub. It makes building networks easier to protect and to run across IT networks.
BACS (building automation and control system)
The controllers, sensors and software that run a building’s heating, cooling, ventilation, lighting and shading automatically. European building rules increasingly require such systems in larger non-residential buildings to cut energy use.
Bandwidth (radio)
The width of the frequency band a radio signal occupies, such as 125 kHz in LoRa. A wider bandwidth sends data faster but reaches less far for the same power.
Barcode
A printed code that a scanner or camera reads optically: one-dimensional lines or two-dimensional codes such as QR. It is cheap and universal but needs a line of sight, which is why some logistics flows use RFID instead.
Base station
The radio site of a mobile network that devices connect to, called an eNodeB in 4G and a gNodeB in 5G. A device’s signal quality depends on its distance to the nearest base station and what stands in between.
Basics Station
Open gateway software that connects a LoRaWAN gateway to a network server over a secure WebSocket connection, instead of the older UDP packet forwarder. Because the connection is encrypted and the gateway authenticates itself, it is the safer way to run gateways over the public internet.
In Hermetry Hermetry’s network server accepts Basics Station gateways, which connect over a secure WebSocket (wss://). More about Basics Station
Batch control
Controlling processes that make products in batches, such as food, drinks, medicines and chemicals, by following recipes split into steps. The ISA-88 standard defines a common model for recipes, equipment and procedures.
Battery life
How long a battery-powered device runs before its battery needs replacing. It depends on the sleep current, how often and how long the radio transmits, the temperature and the battery’s own self-discharge, and it is often the deciding cost of a wireless deployment.
Battery management system
The electronics that watch over a rechargeable battery pack: cell voltages, temperatures, state of charge and health. It balances the cells and disconnects the pack before it is damaged.
Baud rate
The number of signal changes per second on a serial line; on simple serial links it equals bits per second. Every device on an RS-485 bus must use the same baud rate, parity and stop bits, or no one understands anyone.
Beacon
A small radio transmitter, usually Bluetooth Low Energy, that repeats a short identifier. Receivers use beacons to work out which room or zone something is in.
Beamforming
Using several antennas together to point radio energy towards a receiver rather than in all directions. It improves range and capacity and is used in 5G and modern Wi-Fi.
BEMS (building energy management system)
A system that monitors and controls the energy use of a building, often part of or connected to the BMS. It collects meter data, compares it with targets and runs measures such as schedules and setpoint changes.
BER (bit error rate)
The share of transmitted bits that arrive wrong. It rises as the signal weakens or interference grows, and protocols use error-correcting codes and checks to cope with it.
BESS (battery energy storage system)
A large battery system with its inverters and controls that stores electrical energy and releases it later. It is used to shave peaks, store solar power, support the grid and keep sites running during outages.
BIM (building information modelling)
A shared digital model of a building that holds its geometry along with information about its spaces, equipment and systems. Linking sensor data to the model turns it into a digital twin that shows live conditions room by room.
Binary payload
A message whose content is raw bytes rather than readable text, used to keep radio messages short. Each byte or bit has a meaning defined by the device maker, so the receiver needs a decoder to turn it into named values.
Bitmask
Using individual bits of a number as separate yes-or-no flags, as many status registers do: bit 0 might mean "running", bit 3 "fault". A program tests a flag by combining the number with a mask that has only that bit set.
Black start
Restarting a power station or part of the grid after a total blackout without power from the grid, using generators or batteries on site. Monitoring and testing black-start equipment matters because it is rarely used but must work when needed.
BLE (Bluetooth Low Energy)
A short-range, low-power radio used by small battery sensors, beacons and tags. BLE sensors usually reach the internet through a nearby gateway or phone.
In Hermetry A gateway can bring BLE sensors into Hermetry, where each becomes a child device with its own readings and alarms. More about BLE
Blockchain
A shared ledger in which records are chained together so that changing an old record is detectable. It has been proposed for proving where IoT data came from, but it adds cost and complexity, and many systems get similar assurance from signed data and audit logs.
Bluetooth mesh
A way for many Bluetooth Low Energy devices to pass messages to each other so they can cover a whole building without a central hub. It is used mainly for lighting control and building sensors.
BMS (building management system)
The control system that runs a building’s HVAC, lighting, pumps and often access and fire panels from one place. BMS controllers commonly speak BACnet or Modbus.
In Hermetry The building HVAC and energy use case reads the existing BMS or plant controllers through a gateway per building. More about BMS
Bootloader
The small program that runs first when a device powers up and starts the main firmware. A well-designed bootloader checks the firmware’s signature and can fall back to the previous version if an update fails.
Bootstrapping (device)
The first step in a device’s life on a network, in which it receives the credentials and server addresses it needs to connect. Some protocols, such as LwM2M, have a dedicated bootstrap server for this.
Border router
A device that connects a low-power mesh network, such as Thread or another 6LoWPAN network, to a regular IP network like Ethernet or Wi-Fi. Without it the mesh devices cannot reach the internet.
Broadcast
Sending one message that every device on a network receives. It is useful for discovery and for sending the same setting to many devices, but it costs airtime and is usually limited on radio networks.
Brownfield
A site with existing equipment and systems that a new project has to work with rather than replace. Brownfield IoT is mostly about reading what controllers and meters already offer, without stopping them.
Brownout
A drop in supply voltage that is not a full outage, from a weak mains supply or a battery near the end of its life. It can make electronics behave unpredictably, so devices use a brownout detector that resets them cleanly.
Brute-force attack
Guessing passwords or keys by trying very many of them. Rate limits, lockouts, long random keys and multi-factor sign-in make brute force impractical.
Bulk provisioning
Registering many devices at once, usually from a file with their identifiers and keys, instead of adding them one by one. It is what makes rolling out thousands of meters or sensors practical.
In Hermetry Hermetry adds or updates up to 1,000 devices from a CSV file, checks every import before anything is written, and can undo it. More about Bulk provisioning
Bus topology
A wiring layout in which devices hang off one shared line, as on an RS-485 network. A bus needs termination at both ends and only one device should talk at a time.
Busbar
A thick metal bar inside a switchboard that distributes power to many circuits. Monitoring busbar temperature catches loose connections before they overheat and fail.
Byte order
The order in which the bytes of a multi-byte number are sent or stored. Getting it wrong turns a value of 20.5 into nonsense; see endianness.
See your own devices on Hermetry
Connect a first device, watch its readings live and set an alarm on it. Start free, or ask us to set it up with you.

