New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

IoT glossary: Q

IoT and SCADA terms starting with Q: QoS, QR code onboarding, Quadrature encoder, Quality code and 6 more, each with a plain definition.

IoT and SCADA terms starting with Q include Quarantine, QR code onboarding, QoS and Quarter-wave antenna. Each of the 10 entries has a plain definition, its topic and related terms, and how Hermetry handles it where it does.

10 terms on this page · Search all 1,000 terms · Download the whole glossary (PDF, 1.8 MB, 80 pages)

Q

QoS (quality of service, networks)

Rules that give some network traffic priority over the rest, for example by marking packets so routers forward control traffic before bulk uploads. On shared links it keeps commands and alarms responsive when cameras or file transfers fill the line. MQTT has its own, separate delivery QoS levels.

ConnectivityRelated: MQTT QoS, Latency, VLAN

QR code onboarding

Adding a device to a platform or network by scanning a code printed on it, which carries its identifier and often a claim or join secret. It removes typing errors and lets an installer register a device in seconds on site.

In Hermetry To claim a supported device, you can scan the QR code on its own Cloud page with a phone, or type its serial and claim code. More about QR code onboarding

OperationsRelated: Provisioning, Zero-touch provisioning

Quadrature encoder

A rotary or linear encoder with two output channels a quarter of a cycle apart, so a counter can tell both how far a shaft has turned and in which direction. It is common on motors, conveyors and valve positioners.

Devices and sensorsRelated: Pulse counter, Digital input, VFD

Quality code (data quality)

A flag next to a value that says whether it can be trusted: good, uncertain or bad, for example because the sensor failed or the value is stale. Industrial protocols such as OPC UA carry one with every value.

Data and analyticsRelated: OPC UA, Tag, Stale data

Quantisation

Turning a continuous value into one of a fixed number of steps, as an analogue-to-digital converter does. A 12-bit converter over 0–10 V has 4,096 steps of about 2.4 mV, so smaller changes are invisible. Quantisation also describes shrinking machine learning models to small integers so they fit on microcontrollers.

Devices and sensorsRelated: ADC, Resolution, TinyML

Quarantine (device)

Isolating a device that is suspected of being compromised or misbehaving, so it can no longer send data or receive commands until someone checks it. Quarantine is gentler than deleting the device, because its history and identity are kept for investigation.

In Hermetry Devices that register themselves in Hermetry can be held in quarantine until they are approved. More about Quarantine

SecurityRelated: Zero trust, Anomaly detection, Audit log

Quarter-wave antenna

A monopole antenna about a quarter of a wavelength long, the most common simple antenna on IoT devices. At 868 MHz that is roughly 8.6 cm. It needs a ground plane under it to work as intended, so the same whip performs differently on a metal cabinet and on a plastic box.

ConnectivityRelated: Antenna gain, Link budget, ISM band

Queue

A list of messages waiting to be processed or delivered, in order. Queues let systems absorb bursts and keep commands for devices that are asleep or offline.

Data and analyticsRelated: Message broker, Store and forward, Downlink

Quiescent current

The current a circuit draws while doing nothing, for example a voltage regulator with no load. On a battery device that sleeps most of the time, a few microamps of quiescent current can matter more than the current used while sending.

Devices and sensorsRelated: Sleep mode, Battery life, Voltage regulator

Quorum

The minimum number of members of a cluster that must agree before it acts, usually more than half. Quorum stops two halves of a split cluster from both believing they are in charge and writing conflicting data.

Data and analyticsRelated: Split brain, High availability, Redundancy

See your own devices on Hermetry

Connect a first device, watch its readings live and set an alarm on it. Start free, or ask us to set it up with you.