Replied to The Access Rights matrix: a row per permission, a column per role or group

So for our one designer who is a User, I'd make a group and tick designs.write for it? Or does write need Admin no…

2 days, 18 hours ago

Replied to 2.2.2: firmware rollouts in waves, with gates and an automatic pause

Wired ota.rollout.paused into our on-call webhook today. Wave pauses at 2 in the morning are exactly what I want to hear about.

3 days, 13 hours ago

Replied to Steel plant board: eight sites in a table and on a map, open alarms below

Two of your markers near the top are almost on top of each other. Do they group when they overlap?

1 week, 3 days ago

Replied to ESP32-WROOM vs WROVER vs MINI: what do the module names mean and which do I buy?

I always assumed WROOM was "Wireless ROOM" or something. Never checked.

2 weeks, 3 days ago

Replied to Remote Pi gateways reboot at random: how does the Pi detect undervoltage, and can I get an alarm for it?

There's a voltage supervisor on the board that trips at roughly 4.63 V and the firmware latches it. You read it with vcgencmd get_throttled.

1 month, 1 week ago

Replied to SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings

AfcAutoOn on, AfcBw at 41.7 kHz. This week had three mornings at -1 °C and no dropouts. The FEI chart is a nice touch,…

1 month, 2 weeks ago

Started SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings

Point-to-point FSK links for soil moisture probes in orchards, not LoRaWAN, just SX1276 modules (RFM95 boards) in FSK mode at 868.3 MHz, 4.8 kbps,…

1 month, 2 weeks ago

Replied to Open panel on the farm routers fails with two different messages

Router A done via phone call with the farm manager, panel opened on the first try and I fixed the Modbus timeout from my…

1 month, 4 weeks ago