Neu: Die KI-Firewall überwacht die gesamte Plattform und erklärt jeden Vorfall in einfachen Worten. So funktioniert es

Owen Thomas

fw_owen

@owen_t42 · Mitglied seit April 2026

Neuling

Embedded developer · agriculture

Themen
6
Antworten
20
Punkte
0
Neuling10 Punkte an Mitglied

Letzte Aktivität

  1. Geantwortet auf Die Zugriffsrechte-Matrix: eine Zeile pro Berechtigung, eine Spalte pro Rolle oder Gruppe

    So for our one designer who is a User, I'd make a group and tick designs.write for it? Or does write need Admin no…

  2. Geantwortet auf 2.2.2: Firmware-Rollouts in Wellen, mit Gates und automatischer Pause

    Wired ota.rollout.paused into our on-call webhook today. Wave pauses at 2 in the morning are exactly what I want to hear about.

  3. Geantwortet auf Stahlwerk-Dashboard: acht Standorte in Tabelle und Karte, offene Alarme darunter

    Two of your markers near the top are almost on top of each other. Do they group when they overlap?

  4. Geantwortet auf ESP32-WROOM vs WROVER vs MINI: what do the module names mean and which do I buy?

    I always assumed WROOM was "Wireless ROOM" or something. Never checked.

  5. Geantwortet auf Entfernte Pi-Gateways starten zufällig neu: Wie erkennt der Pi Unterspannung, und kann ich dafür einen Alarm bekommen?

    There's a voltage supervisor on the board that trips at roughly 4.63 V and the firmware latches it. You read it with vcgencmd get_throttled.

  6. Geantwortet auf SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings

    AfcAutoOn on, AfcBw at 41.7 kHz. This week had three mornings at -1 °C and no dropouts. The FEI chart is a nice touch,…

  7. Gestartet SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings

    Point-to-point FSK links for soil moisture probes in orchards, not LoRaWAN, just SX1276 modules (RFM95 boards) in FSK mode at 868.3 MHz, 4.8 kbps,…

  8. Geantwortet auf Open panel auf den Farm-Routern schlägt mit zwei verschiedenen Meldungen fehl

    Router A done via phone call with the farm manager, panel opened on the first try and I fixed the Modbus timeout from my…