Yeni: Yapay zekâ güvenlik duvarı tüm platformu izliyor ve her olayı sade bir dille açıklıyor. Nasıl çalıştığını görün

Owen Thomas

fw_owen

@owen_t42 · Nisan 2026 tarihinde katıldı

Yeni üye

Embedded developer · agriculture

Konular
6
Yanıtlar
20
Puan
0
Yeni üye10 için Üye puan

Son etkinlik

  1. Yanıtlanan Erişim Hakları matrisi: her izin için bir satır, her rol veya grup için bir sütun

    So for our one designer who is a User, I'd make a group and tick designs.write for it? Or does write need Admin no…

  2. Yanıtlanan 2.2.2: dalgalar halinde firmware dağıtımları, kapılar ve otomatik duraklatma

    Wired ota.rollout.paused into our on-call webhook today. Wave pauses at 2 in the morning are exactly what I want to hear about.

  3. Yanıtlanan Çelik tesisi paneli: tabloda ve haritada sekiz saha, altta açık alarmlar

    Two of your markers near the top are almost on top of each other. Do they group when they overlap?

  4. Yanıtlanan ESP32-WROOM vs WROVER vs MINI: what do the module names mean and which do I buy?

    I always assumed WROOM was "Wireless ROOM" or something. Never checked.

  5. Yanıtlanan Uzaktaki Pi geçitleri rastgele yeniden başlıyor: Pi düşük gerilimi nasıl algılıyor ve bunun için alarm alabilir miyim?

    There's a voltage supervisor on the board that trips at roughly 4.63 V and the firmware latches it. You read it with vcgencmd get_throttled.

  6. Yanıtlanan SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings

    AfcAutoOn on, AfcBw at 41.7 kHz. This week had three mornings at -1 °C and no dropouts. The FEI chart is a nice touch,…

  7. Başlatılan SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings

    Point-to-point FSK links for soil moisture probes in orchards, not LoRaWAN, just SX1276 modules (RFM95 boards) in FSK mode at 868.3 MHz, 4.8 kbps,…

  8. Yanıtlanan Çiftlik router'larında Open panel iki farklı mesajla başarısız oluyor

    Router A done via phone call with the farm manager, panel opened on the first try and I fixed the Modbus timeout from my…