Novedad: el cortafuegos de IA supervisa toda la plataforma y explica cada incidente con palabras sencillas. Vea cómo funciona

Owen Thomas

fw_owen

@owen_t42 · Se unió el abril 2026

Recién llegado

Embedded developer · agriculture

Temas
6
Respuestas
20
Puntos
0
Recién llegado10 puntos para Miembro

Actividad reciente

  1. Respondidos La matriz de derechos de acceso: una fila por permiso, una columna por rol o grupo

    So for our one designer who is a User, I'd make a group and tick designs.write for it? Or does write need Admin no…

  2. Respondidos 2.2.2: despliegues de firmware por oleadas, con umbrales y pausa automática

    Wired ota.rollout.paused into our on-call webhook today. Wave pauses at 2 in the morning are exactly what I want to hear about.

  3. Respondidos Panel de acería: ocho sitios en una tabla y en un mapa, alarmas activas debajo

    Two of your markers near the top are almost on top of each other. Do they group when they overlap?

  4. Respondidos ESP32-WROOM vs WROVER vs MINI: what do the module names mean and which do I buy?

    I always assumed WROOM was "Wireless ROOM" or something. Never checked.

  5. Respondidos Las pasarelas Pi remotas se reinician al azar: ¿cómo detecta el Pi la subtensión y puedo recibir una alarma por ello?

    There's a voltage supervisor on the board that trips at roughly 4.63 V and the firmware latches it. You read it with vcgencmd get_throttled.

  6. Respondidos SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings

    AfcAutoOn on, AfcBw at 41.7 kHz. This week had three mornings at -1 °C and no dropouts. The FEI chart is a nice touch,…

  7. Iniciados SX1276 in FSK mode: what AFC, AGC, RSSI and FEI do, and why my links fail on cold mornings

    Point-to-point FSK links for soil moisture probes in orchards, not LoRaWAN, just SX1276 modules (RFM95 boards) in FSK mode at 868.3 MHz, 4.8 kbps,…

  8. Respondidos Open panel en los routers de la granja falla con dos mensajes diferentes

    Router A done via phone call with the farm manager, panel opened on the first try and I fixed the Modbus timeout from my…