Industries
Sector guides for water, energy, manufacturing, food, pharma, logistics, mining, agriculture, buildings, and oil and gas: what to monitor, how the data gets in and which alarms matter.
-
Modbus security: protecting energy meters and inverters on a protocol with no authentication
Modbus answers any valid request. Why the protocol cannot fix that itself, and the network, firewall and gateway measures energy sites put around it.
-
Machine downtime tracking from a run signal to a downtime log
A state timeline is not a downtime log. How to go from a run signal to a list of stops with reasons, short-stop rules and planned…
-
Minimum night flow leak detection: finding bursts in a water network from flow and pressure
Utilities find leaks by metering whole zones and reading them at night. District metered areas, the night flow calculation, the night-day factor and the pressure drop…
-
Greenhouse temperature and humidity monitoring: choosing and placing sensors
A good sensor in direct sun or a wet shield still reports the wrong air. Placement, shields, humidity probe care and the data patterns of a…
-
BLE indoor asset tracking in warehouses: zones, readers and battery life
Why ‘which zone, since when’ beats coordinates in a warehouse, when tags should advertise or scan, and how the advertising interval trades battery life against speed.
-
Building energy monitoring with the meters you already have
The main meter and the sub-meters already count most of what a facilities team needs: consumption per hour, demand, night-time base load and fair week-to-week comparisons.
-
Switchgear vs MCC vs distribution board: what each does and what to measure
Three cabinets, three jobs: switchgear protects the main feeders, an MCC runs the motors, a distribution board feeds the small circuits. What to read and alarm…
-
Warehouse temperature mapping for pharmaceutical storage
A logger every 5 to 10 metres, three or four heights, seven days, ±0.5 °C. What the WHO mapping supplement asks for, and how to read…
-
Pharma data integrity for environmental monitoring: audit trails, timestamps and who changed what
An inspector asks who changed a value, when and why. ALCOA+, audit trails and clock accuracy, read from the WHO guideline, Annex 11 and 21 CFR…
See your field data live this week
Start a trial in your region with your first devices, or book a demo and bring your own use case.

