This LoRaWAN airtime calculator gives the time a packet spends on air: the symbol time 2SF ÷ bandwidth, times the preamble and payload symbols. At SF7 and 125 kHz, 12 bytes plus the 13-byte LoRaWAN frame take about 62 ms; at SF12 about 1.5 s.
- Time on air
- – ms
- Messages per hour within a 1 % duty cycle
- –
- Wait between messages at 1 %
- – s
- Bytes on air (PHY payload)
- – bytes
- Symbol time
- – ms
- Payload symbols
- –
Low data rate optimisation is on.Low data rate optimisation is off.
Enter a payload from 0 to 255 bytes in total and a preamble of at least 6 symbols.
How it works
How is LoRa time on air calculated?
A LoRa symbol lasts 2SF ÷ bandwidth: 1.024 ms at SF7 and 125 kHz, and twice as long for each step up in spreading factor. The preamble takes its symbols plus 4.25 more.
The payload takes 8 symbols, plus the bytes on air turned into blocks of 4 × (SF − 2 × DE) bits, each block costing 4 + coding rate symbols. CRC adds 16 bits; an explicit header adds 20. DE is 1 when low data rate optimisation is on.
Time on air is the preamble plus the payload, in symbols, times the symbol time. A 1 % duty cycle allows 36 seconds of transmitting per hour, so the number of messages is 36,000 ms divided by the time on air.
Duty cycle limits depend on the band and the channel: many channels of the EU 868 MHz band allow 1 %, others 0.1 % or 10 %. The LoRaWAN regional parameters also cap the payload per data rate.
In Hermetry Hermetry’s network server picks data rates for your devices with adaptive data rate: ADR, data rates and MAC commands.
Glossary Time on air, Spreading factor (SF), Duty cycle, Coding rate, ADR (adaptive data rate)
Questions
Questions about the LoRaWAN airtime calculator
What is time on air?
The time a radio spends transmitting one packet. It grows with the spreading factor and the payload: 12 bytes of application data take about 62 ms at SF7 and about 1.5 seconds at SF12 on 125 kHz.
Why does airtime matter for LoRaWAN?
In many bands a device may transmit only a share of the time (the duty cycle), and every millisecond on air costs battery and occupies a channel other devices share. Shorter airtime means more messages and a longer battery life.
Does the calculator count the LoRaWAN header?
Yes, when the box is ticked: an uplink adds 13 bytes to your application payload (header, device address, frame control, frame counter, port and message integrity code), more if MAC commands ride along.
More tools

