This dBm to mW converter uses P(mW) = 10dBm ÷ 10: 0 dBm is 1 mW, 14 dBm about 25 mW and 30 dBm 1 W. It also checks a LoRa packet’s SNR against its spreading factor’s decode limit, from −7.5 dB at SF7 to −20 dB at SF12.
- Power
- – mW
- In watts
- – W
- In microwatts
- – µW
- SNR above the decode limit
- – dB
- Decode limit for this spreading factor
- – dB
Strong: plenty of room for fading.Good: a working link with some room.Weak: the packet decodes, but fading may drop the next one.Below the limit: packets at this SNR are usually lost. An RSSI below −120 dBm is near the edge of most gateways.
Enter a power between −200 and 100 dBm.
How it works
How do you convert dBm to mW?
dBm is power on a logarithmic scale relative to one milliwatt: P in mW = 10dBm ÷ 10, and dBm = 10 × log₁₀(P in mW). 0 dBm is 1 mW, +10 dB is ten times more and +3 dB about twice as much.
RSSI is the received signal strength; SNR is how far the signal stands above the noise. LoRa can decode packets whose SNR is below zero, down to a limit set by the spreading factor: −7.5 dB at SF7 and 2.5 dB lower per step to −20 dB at SF12.
The margin is the SNR minus that limit. The labels are a rule of thumb: 10 dB or more is strong, 5 to 10 dB good, 0 to 5 dB weak.
In Hermetry When uplinks go missing, Hermetry’s LoRaWAN troubleshooting starts from the RSSI and SNR of the latest reception: Troubleshooting uplinks and downlinks.
Glossary RSSI (received signal strength indicator), SNR (signal-to-noise ratio), Link budget
Questions
Questions about the dBm to mW converter
What is dBm?
Power relative to one milliwatt on a logarithmic scale. 0 dBm is 1 mW, 14 dBm is about 25 mW and 30 dBm is 1 W; every 10 dB is a factor of ten.
What RSSI is good for LoRa?
RSSI alone does not say whether a packet decodes, because LoRa works below the noise floor. Look at the SNR against the spreading factor’s limit: the margin above it is what keeps the link working.
Can SNR be negative?
Yes. LoRa decodes signals below the noise: down to −7.5 dB at SF7 and −20 dB at SF12.
More tools

