New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

IoT data calculator

Free IoT data calculator: messages and megabytes per day and per month for a fleet of devices, from values per message, the interval and bytes per value.

This IoT data calculator multiplies devices × messages per day × bytes per message. 100 devices sending 5 values of 20 bytes every minute make 144,000 messages and 14.4 MB a day, 0.43 GB in a 30-day month.

For example temperature, humidity, battery, signal and a status.

A value in JSON with its name, such as “temperature”:21.5, takes about 20 bytes; in a binary format, 2 to 4 bytes.

Protocol overhead, if you want it counted. MQTT adds a few bytes of header plus the topic name to each message; HTTP adds a request line and headers, often several hundred bytes. TLS and TCP add more on the wire.

Data per day
– MB
Data per month (30 days)
– GB
Messages per day
–
Messages per month (30 days)
–
Bytes per message
– bytes

1 MB = 1,000,000 bytes and 1 GB = 1,000,000,000 bytes.

How it works

How much data does an IoT device send?

Each device sends 86,400 ÷ interval in seconds messages a day. A message carries values × bytes per value, plus any extra bytes you enter.

Data per day is devices × messages per device × bytes per message. A month here is 30 days.

The result is the payload you send. A mobile data plan also counts the protocol, encryption and connection set-up, so leave room above it, especially for devices that connect again for every message.

In Hermetry How Hermetry counts device messages: Message quota and usage. Sending readings over MQTT: MQTT topics and payload reference.

Glossary Telemetry, Sampling rate, Report by exception, MQTT

Questions

Questions about the IoT data calculator

How many messages is one per minute?

1,440 a day and 43,200 in a 30-day month, for each device.

Does the result include protocol overhead?

Only the extra bytes you enter. Without them it is the payload alone; TLS, TCP and connection set-up add more on a metered data plan.