serhat.evcim
@serhat-evcim · Joined August 2026
- Topics
- 11
- Replies
- 33
- Points
- 0
Forum Replies Created
3D Designs is part of the SCADA and 3D modules, which come with the IoT add-on. If your organisation has it, the Home library and the basic shapes are free in 3D, and the core set’s 3D twins come with the SCADA module.
Those are symbols with no 3D shape yet, or with a shape in a library your workspace does not hold. The view tells you how many of each. The boxes are connected like their symbols, to the same devices and values.
It sits on the 2D view of a device or a site, under its Views: Make a 3D view of this drawing. Save the drawing first, the 3D view is made from the saved version. It is added as a new view beside the 2D one and keeps the same connections.
A drawing takes up to 200 symbols, 300 connections and 100 titles, zones and dividers. This one uses a small part of that. The Problems tab warns as you get close (“180 of 200 symbols are used”). Past that, split it into two drawings, one per half of the line.
Factory. The press, robot arm, vision camera, case packer, case lift, palletiser, pallet and guided vehicle are all Factory symbols. The padlock means your workspace does not hold it, and the tile links to the store. Symbols and industry packs
Speed is one of the fields symbols draw, in % of nominal. Click the conveyor under Edit symbols on the device’s Views: the Symbol data panel lists the fields that symbol draws. If Speed is among them, connect it to the drive’s value and convert in the expression box, for a 50 Hz nominal something like:
value / 50 * 100The same goes for Direction (Forward or Reverse) if the belt can run backwards.
Select it and look under Position and size. Pipes and conveyors have Length (cells), from 1 to 3. Own size (0.2 to 4) scales the whole symbol, which is what made your rollers grow. For a long run I put two or three conveyors end to end.
Gerekmiyor. MQTT, HTTP ya da LoRaWAN kullanan her cihaz Hermetry’ye doğrudan bağlanabiliyor. PLC programına MQTT eklemek istemiyorsanız arada Modbus TCP’yi okuyup MQTT ile gönderen bir cihaz olur, sahada çoğu zaman bir Pi ya da endüstriyel bir PC. Çok sayıda saha cihazı tek bir bağlantı üzerinden gelecekse dokümantasyondaki Lisanslı ağ geçitleri ve Hermetry Edge sayfasına da bakın.
Hoş geldiniz Selim Bey. Çizim tarafı için dokümantasyonda SCADA bölümündeki SCADA tasarımcısı sayfasıyla başlayın: çizimi bir kez yapıp bir cihaza ya da tesise ekliyorsunuz, sonra sembolleri cihazın değerlerine bağlıyorsunuz. Çekirdek sembol seti her zaman açık, hat ekipmanları için Fabrika kütüphanesi ayrıca alınıyor.
Per connection. Select the pipe and tick Flow arrow in the inspector. It is off by default.
In this sample the reservoir branch takes off before the PRV, so the reservoir gets the pumps’ pressure. The PRV lowers the pressure for everything after it, which in the drawing includes the tower branch and the hydrant. But it is a demo layout I drew to show the symbols, not a hydraulic design, so please do not take it as how a network should be built.
One is enough. Each device keeps its own connections. If the six stations share a device profile, open the profile, choose Views in its header and bind the drawing to all of its devices in one go. One catch: nothing is stored on the profile itself, so a seventh station added later needs the run again or a view attached by hand. One drawing for many places
Yes, Calm look. Click on the empty canvas so nothing is selected, and the inspector shows the settings for the whole drawing. With Calm look on, running parts are drawn in plain ink and only warnings and alarms get colour. It is off by default.
More than tanks. The core set is always open and it has a Shop floor (MES) family: andon board, andon call station, operator terminal, WIP buffer lane, reject bin, inspection station, end-of-line tester and a kanban flow rack. Past that, the Factory library covers factory automation, logistics and warehousing, and metalworking. Industry libraries are bought one by one, and each one covers both 2D and 3D. Full lists on Symbols and industry packs.
Not blind, it is on purpose. The drawing holds no device data. After you save it, you attach it on the device’s (or the site’s) Views tab and connect each symbol there with Edit symbols. That way one drawing can serve many stations and each keeps its own connections.
Shortcut if you control the firmware: keys named <symbol id>.<field>, for example pump1.running or t1.value, connect by name without any clicking. Binding symbols to live data