Replied to 2.2.1: a 3D view built from a 2D process drawing in one click

What happens when someone edits the 2D drawing later? I would hate to lose walls I drew by hand in 3D.

1 week, 3 days ago

Replied to 2.2.1: remote device settings, baselines and bulk change jobs

What happens when a job is running and one of my technicians changes the same device by hand from its page?

1 week, 4 days ago

Replied to Trailer tracker on a NodeMCU: map card says no rows with valid coordinates

Before you worry about trails, watch the message count. One message every 5 s is about 518,000 a month per device. Starter is 1,150,000…

1 month, 1 week ago

Replied to Access groups for a plant team, starting from the Groups tab

And the other direction? We have contractors at User level who should not send any commands at all. If groups only add, how do…

1 month, 1 week ago

Replied to ESP32 connects in setup() but client.connected() is false a few seconds later in loop()

delay(30000) with nothing serviced. That's your problem.

3 months, 3 weeks ago

Replied to Sending one instruction to every node in a Contiki 6LoWPAN mesh behind our border router

Contractor did the unicast loop in two days, no site visit. QA presses "Validation on", the gateway answers with 30/30 acked about 8 seconds…

3 months, 3 weeks ago

Started Sending one instruction to every node in a Contiki 6LoWPAN mesh behind our border router

Plant manager, so forgive the vocabulary. Our contractor put 30 wireless temperature nodes in the cold stores two years ago. They run Contiki-NG on…

3 months, 4 weeks ago

Replied to Textile plant manager, here to lurk and learn

Compressors first. Usually the easy win.

6 months, 3 weeks ago