Respondidos 2.2.1: una vista 3D creada a partir de un dibujo de proceso 2D con un solo clic

What happens when someone edits the 2D drawing later? I would hate to lose walls I drew by hand in 3D.

hace 1 semana, 3 días

Respondidos 2.2.1: ajustes remotos de dispositivos, líneas base y trabajos de cambio masivo

What happens when a job is running and one of my technicians changes the same device by hand from its page?

hace 1 semana, 4 días

Respondidos Rastreador de remolques en un NodeMCU: la tarjeta de mapa indica que no hay filas con coordenadas válidas

Before you worry about trails, watch the message count. One message every 5 s is about 518,000 a month per device. Starter is 1,150,000…

hace 1 mes, 1 semana

Respondidos Grupos de acceso para un equipo de planta, empezando por la pestaña Groups

And the other direction? We have contractors at User level who should not send any commands at all. If groups only add, how do…

hace 1 mes, 1 semana

Respondidos ESP32 connects in setup() but client.connected() is false a few seconds later in loop()

delay(30000) with nothing serviced. That's your problem.

hace 3 meses, 3 semanas

Respondidos Enviar una sola instrucción a cada nodo de una malla Contiki 6LoWPAN detrás de nuestro router de borde

Contractor did the unicast loop in two days, no site visit. QA presses "Validation on", the gateway answers with 30/30 acked about 8 seconds…

hace 3 meses, 3 semanas

Iniciados Enviar una sola instrucción a cada nodo de una malla Contiki 6LoWPAN detrás de nuestro router de borde

Plant manager, so forgive the vocabulary. Our contractor put 30 wireless temperature nodes in the cold stores two years ago. They run Contiki-NG on…

hace 3 meses, 4 semanas

Respondidos Textile plant manager, here to lurk and learn

Compressors first. Usually the easy win.

hace 6 meses, 3 semanas