ops_tyler
@moore-t · Joined April 2025
Plant manager · food and beverage · 24 years in the field
- Topics
- 2
- Replies
- 9
- Points
- 0
Forum Replies Created
What happens when someone edits the 2D drawing later? I would hate to lose walls I drew by hand in 3D.
What happens when a job is running and one of my technicians changes the same device by hand from its page?
Before you worry about trails, watch the message count. One message every 5 s is about 518,000 a month per device. Starter is 1,150,000 for the whole organisation. We send every 30 s while moving and once every 10 min parked.
And the other direction? We have contractors at User level who should not send any commands at all. If groups only add, how do I take that away from them?
delay(30000) with nothing serviced. That’s your problem.
Contractor did the unicast loop in two days, no site visit. QA presses “Validation on”, the gateway answers with 30/30 acked about 8 seconds later, and the nodes’ sample_period attribute flips to 30. Went from an hour to a button. Thanks both, and I’ve stopped saying “just broadcast it”.
Compressors first. Usually the easy win.
Clear, thank you both. Demo of a laser head next week; the supplier’s controller can push the reject gate and give us an analogue output we’ll send to Hermetry. Out-of-tolerance rule is set up with test data. Calipers stay until we trust it.
Thanks, I’ll get a demo. Any idea on the Forge part?