emily23

@smith-e · Joined January 2026

Newcomer

Facility manager · hospitality

Topics: 4
Replies: 24
Points: 0

Newcomer10 points to Member

Topics Engaged In

Topics Replies Voices Last post

Solved Closing io-homecontrol roof windows from a Raspberry Pi when it rains

by carlosc76 in Supported devices and hardware · 7 replies

7 6 3 days, 8 hours ago by carlosc76

A home heating station in the 3D designer: rooms, heat pump, buffer tank and cylinder

by serhat.evcim in Show and tell · 8 replies

8 5 1 week ago by serhat.evcim

2.2.0: the device list and device page, the profile editor, the Commands tab and the device log

by bugra.demiriz in Announcements · 7 replies

7 5 2 weeks, 1 day ago by emily23

Solved Python call to the latest-values endpoint hangs for two minutes on our Pi

by emily23 in REST API · 4 replies

4 4 1 month, 1 week ago by emily23

Solved Copied firmware from our US plant, devices in the UK plant get “bad username or password”

by daniel_sec in Deployment: cloud regions and on-premises · 8 replies

8 7 1 month, 2 weeks ago by daniel_sec

Solved Switching a server room split AC off and on from Hermetry with a 16 A plug relay

by emily30 in Supported devices and hardware · 5 replies

5 4 1 month, 3 weeks ago by emily30

Solved ttyAMA0, ttyS0, serial0: which one should my Modbus HAT use on a Pi 3B+?

by james56 in Raspberry Pi · 4 replies

4 4 1 month, 3 weeks ago by james56

Solved ModbusMaster on a Mega: first meter answers, second one always times out

by kevin.cto in Modbus, OPC UA and fieldbus · 8 replies

8 6 2 months, 2 weeks ago by emily23

Solved Building a mains-powered gas monitor box for a UK boiler room: which rules apply?

by sneha_dev in Hermetry Safe · 8 replies

8 7 3 months ago by sneha_dev

Solved Nano + RFM95 sensor sends one LoRaWAN uplink on a power bank and then goes silent

by davidp11 in LoRaWAN, NB-IoT and cellular · 5 replies

5 4 3 months, 3 weeks ago by kevin.cto

Solved Can my relays just subscribe to their own MQTT topic, or does Hermetry want something else for actuators?

by kevin.cto in MQTT and HTTP · 6 replies

6 5 3 months, 4 weeks ago by kevin.cto

Solved Hotel thermostat firmware: vendor says flash erases in blocks, so no small updates. Risky to push the full image?

by emily23 in Device profiles and provisioning · 4 replies

4 3 4 months, 1 week ago by emily23

Solved Read-only filesystem on my RaspAP gateway Pi: what happens to the buffered readings?

by wilsonmaker in Gateways and edge · 8 replies

8 7 4 months, 3 weeks ago by wilsonmaker

Solved ESP32 driving a RAK3172 over UART: no reply to AT commands, then how to join

by davidp11 in LoRaWAN, NB-IoT and cellular · 4 replies

4 4 4 months, 4 weeks ago by davidp11

Solved Measuring a 12 V battery without the divider draining it, and a low-battery alarm that flaps in the sun

by rf_jessica in Alarms and notifications · 8 replies

8 7 5 months, 3 weeks ago by rf_jessica