Replied to Closing io-homecontrol roof windows from a Raspberry Pi when it rains

Ordered a KLF 200, paired all 14 in an afternoon (the "add product" step from each keypad is fiddly, you have to hold it…

3 days, 8 hours ago

Replied to 2.2.1: custom domains, with the certificate held and renewed by the platform

Set one up for a customer portal on Friday. Verify DNS went through on the first try and Force SSL check showed SSL Active…

1 week, 3 days ago

Replied to Closing io-homecontrol roof windows from a Raspberry Pi when it rains

Yeah feedback is the whole point for the dashboard. The keypads are the 3UK type if that matters. Windows were installed 2021.

1 week, 4 days ago

Started 24 strain gauges on a retaining wall: removing the temperature effect and grouping them by wall section

A client of ours has a 90 m concrete retaining wall above the access road to their battery storage site, and after a wet…

2 weeks, 2 days ago

Replied to 2.2.0: the device list and device page, the profile editor, the Commands tab and the device log

How far back does the Log tab go? One of our sites drops off a couple of nights a week and I want to…

2 weeks, 3 days ago

Replied to Yard sensors at the edge of Wi-Fi: why does it get so slow, and what do I do about it?

Are the APs on 2.4 or 5 GHz for those clients? 5 GHz dies much faster through the yard clutter.

2 weeks, 4 days ago

Replied to 2.2.0: conveyor belts get a width and a height, with their connection points bound to them

Can the belt animation follow the real line speed? Our drives report speed in Hz, not percent.

2 weeks, 6 days ago

Replied to Showing an inspection drone’s position and flight path live on a board

Worked on the first test flight. Live marker moves, and the replay after landing showed exactly which rows we covered, the client loved the…

3 weeks ago