Replied to Two device profiles for a small cold store: one per kind of device

We have 12 freezers with the same controller. One profile for all twelve then, not twelve?

1 week ago

Replied to A home heating station in the 3D designer: rooms, heat pump, buffer tank and cylinder

Did you type the room areas in?

1 week, 3 days ago

Replied to Where am I signed in? The Active Sessions list on My Profile > Security

Useful. As an admin, what can I do about other people's sessions? We have two shared PCs in the control room and I never…

1 month, 4 weeks ago

Replied to ESP8266 room nodes, a Pi in the middle, Hermetry on top: sane design?

Thank you both. Bought the UPS, the Pi has been running as the gateway for two weeks. Last Tuesday we had 4 hours off…

8 months, 3 weeks ago

Started ESP8266 room nodes, a Pi in the middle, Hermetry on top: sane design?

Hello. I manage a guest house, 12 rooms, and I'm new to all of this, so please be patient with me. I want temperature,…

9 months ago

Replied to Uploading to a Nano through an HC-05 fails with stk500_getsync not in sync

It works! My Nano only uploads with "Old Bootloader", so I set AT+UART=57600,0,0. Soldering to pin 32 was the scariest part, a neighbour with…

10 months, 2 weeks ago

Replied to Uploading to a Nano through an HC-05 fails with stk500_getsync not in sync

Kevin, maybe one day. The Nano is already wired up and I don't want to redo the ceiling. I don't know the HC-05's baud,…

11 months, 1 week ago

Started Uploading to a Nano through an HC-05 fails with stk500_getsync not in sync

I look after a guesthouse and I'm learning as I go, so sorry if this is silly. We have an Arduino Nano above the…

11 months, 3 weeks ago