New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

Daniel Harris

danielh21

@daniel-harris · Joined March 2026

Newcomer

Embedded developer · energy · 10 years in the field

Topics
0
Replies
5
Points
0
Newcomer10 points to Member

Recent activity

  1. Replied to USBasp on a Mac won’t see my ATmega328P boards: “could not find USB device”

    Does it even show up in System Information under USB?

  2. Replied to Spreading factor, chips and symbols: why my 58-byte tracker frame never arrives from far away

    Lat/lng as int32 × 1e6 is 8 bytes for both, plenty precise for a trailer.

  3. Replied to Weekly gas use from a pulse-counting ESP32 on our Landis+Gyr meter, mailed to finance every Monday

    Banerjee's right, there's no mailed report. We do this for about 20 energy meters with a small script on our own server, built on…

  4. Replied to Our RFM95 board hears the gateway 17 dB worse than the dev board

    6 mm is electrically short at 868, matching shouldn't cost you 17 dB. Look elsewhere.

  5. Replied to Pi gateway: “RTNETLINK answers: File exists” on ifup eth0 and keepalive drops after boot

    Bullseye uses dhcpcd for networking. /etc/network/interfaces is the old way, I would not mix them.