Neu: Die KI-Firewall überwacht die gesamte Plattform und erklärt jeden Vorfall in einfachen Worten. So funktioniert es

Daniel Harris

danielh21

@daniel-harris · Mitglied seit März 2026

Neuling

Embedded developer · energy · 10 years in the field

Themen
0
Antworten
5
Punkte
0
Neuling10 Punkte an Mitglied

Letzte Aktivität

  1. Geantwortet auf USBasp am Mac erkennt meine ATmega328P-Boards nicht: "could not find USB device"

    Does it even show up in System Information under USB?

  2. Geantwortet auf Spreading factor, chips and symbols: why my 58-byte tracker frame never arrives from far away

    Lat/lng as int32 × 1e6 is 8 bytes for both, plenty precise for a trailer.

  3. Geantwortet auf Wöchentlicher Gasverbrauch über einen impulszählenden ESP32 am Landis+Gyr-Zähler, jeden Montag per E-Mail an die Buchhaltung

    Banerjee's right, there's no mailed report. We do this for about 20 energy meters with a small script on our own server, built on…

  4. Geantwortet auf Our RFM95 board hears the gateway 17 dB worse than the dev board

    6 mm is electrically short at 868, matching shouldn't cost you 17 dB. Look elsewhere.

  5. Geantwortet auf Pi-Gateway: "RTNETLINK answers: File exists" bei ifup eth0 und Keepalive-Abbrüche nach dem Booten

    Bullseye uses dhcpcd for networking. /etc/network/interfaces is the old way, I would not mix them.