Nouveau : le pare-feu IA surveille toute la plateforme et explique chaque incident en termes simples. Découvrez comment ça marche

Daniel Harris

danielh21

@daniel-harris · Membre depuis mars 2026

Nouveau

Embedded developer · energy · 10 years in the field

Sujets
0
Réponses
5
Points
0
Nouveau10 points pour Membre

Activité récente

  1. Réponses à USBasp sur Mac ne détecte pas mes cartes ATmega328P : "could not find USB device"

    Does it even show up in System Information under USB?

  2. Réponses à Spreading factor, chips and symbols: why my 58-byte tracker frame never arrives from far away

    Lat/lng as int32 × 1e6 is 8 bytes for both, plenty precise for a trailer.

  3. Réponses à Consommation hebdomadaire de gaz mesurée par un ESP32 à comptage d'impulsions sur notre compteur Landis+Gyr, envoyée chaque lundi par e-mail à la finance

    Banerjee's right, there's no mailed report. We do this for about 20 energy meters with a small script on our own server, built on…

  4. Réponses à Our RFM95 board hears the gateway 17 dB worse than the dev board

    6 mm is electrically short at 868, matching shouldn't cost you 17 dB. Look elsewhere.

  5. Réponses à Passerelle Pi : « RTNETLINK answers: File exists » sur ifup eth0 et coupures keepalive après le démarrage

    Bullseye uses dhcpcd for networking. /etc/network/interfaces is the old way, I would not mix them.