Replied to 2.3.0: LoRaWAN ABP and Class C, plus new SCADA symbols for more industries

Class C is what we needed for the street light controllers. How long after the last uplink does a downlink still go out straight…

4 days, 19 hours ago

Replied to Sensors on campus lamp posts with no wiring, can we power them wirelessly?

Do this kind of work for a council, so a few things. Whatever Hermetry City adds, I found no doc page for it, so…

6 days, 12 hours ago

Replied to 2.2.1: the Sites template, cards that fit their content, row columns and values by name

That was it. They were all placed under the region, one level too high. Moved them and the markers went green.

1 week, 4 days ago

Replied to 2.2.1: the Sites template, cards that fit their content, row columns and values by name

Every site on my Sites board is Unknown with grey markers. The devices are online and sending, I can see them on the device…

1 week, 6 days ago

Replied to Changing report interval and deadband on 300 controllers in the field: attributes or commands?

Commands to an offline unit only wait if you send them persistent, and that gives up after 7 days at most. Attributes are state,…

2 weeks, 2 days ago

Replied to Uno resets every time my Pi script opens /dev/ttyUSB0

+1 on sending a total. If you ever need consumption per hour, the history API and charts can work it out from the counter.

2 weeks, 3 days ago

Started Two Unos over a pair of HC-05s so the one with the GSM modem reports both

Home project. Uno A in the shed reads soil moisture for the greenhouse beds and a door contact. Uno B in the house has…

3 weeks ago

Replied to Serial console to my Pi gateway shows escape codes instead of colours and htop is a mess

Try picocom instead of PuTTY? I always found PuTTY weird on serial.

1 month ago