Nouveau : le pare-feu IA surveille toute la plateforme et explique chaque incident en termes simples. Découvrez comment ça marche

Ciarán Walsh

ciaran55

@ciaranwalsh55 · Membre depuis juin 2025

Nouveau

Smart-city engineer · energy

Sujets
9
Réponses
68
Points
0
Nouveau10 points pour Membre

Activité récente

  1. Réponses à 2.3.0 : LoRaWAN ABP et Class C, plus de nouveaux symboles SCADA pour davantage d'industries

    Class C is what we needed for the street light controllers. How long after the last uplink does a downlink still go out straight…

  2. Réponses à Sensors on campus lamp posts with no wiring, can we power them wirelessly?

    Do this kind of work for a council, so a few things. Whatever Hermetry City adds, I found no doc page for it, so…

  3. Réponses à 2.2.1 : le modèle Sites, des cartes adaptées à leur contenu, colonnes de lignes et valeurs par nom

    That was it. They were all placed under the region, one level too high. Moved them and the markers went green.

  4. Réponses à 2.2.1 : le modèle Sites, des cartes adaptées à leur contenu, colonnes de lignes et valeurs par nom

    Every site on my Sites board is Unknown with grey markers. The devices are online and sending, I can see them on the device…

  5. Réponses à Modifier l'intervalle de rapport et la zone morte sur 300 contrôleurs sur le terrain : attributs ou commandes ?

    Commands to an offline unit only wait if you send them persistent, and that gives up after 7 days at most. Attributes are state,…

  6. Réponses à La Uno se réinitialise à chaque ouverture de /dev/ttyUSB0 par mon script Pi

    +1 on sending a total. If you ever need consumption per hour, the history API and charts can work it out from the counter.

  7. Ouverts Two Unos over a pair of HC-05s so the one with the GSM modem reports both

    Home project. Uno A in the shed reads soil moisture for the greenhouse beds and a door contact. Uno B in the house has…

  8. Réponses à La console série de ma passerelle Pi affiche des codes d'échappement au lieu des couleurs et htop est un désastre

    Try picocom instead of PuTTY? I always found PuTTY weird on serial.