Neu: Die KI-Firewall überwacht die gesamte Plattform und erklärt jeden Vorfall in einfachen Worten. So funktioniert es

Ciarán Walsh

ciaran55

@ciaranwalsh55 · Mitglied seit Juni 2025

Neuling

Smart-city engineer · energy

Themen
9
Antworten
68
Punkte
0
Neuling10 Punkte an Mitglied

Letzte Aktivität

  1. Geantwortet auf 2.3.0: LoRaWAN ABP und Class C sowie neue SCADA-Symbole für weitere Branchen

    Class C is what we needed for the street light controllers. How long after the last uplink does a downlink still go out straight…

  2. Geantwortet auf Sensors on campus lamp posts with no wiring, can we power them wirelessly?

    Do this kind of work for a council, so a few things. Whatever Hermetry City adds, I found no doc page for it, so…

  3. Geantwortet auf 2.2.1: Die Sites-Vorlage, Karten, die zu ihrem Inhalt passen, Tabellenspalten und Werte nach Name

    That was it. They were all placed under the region, one level too high. Moved them and the markers went green.

  4. Geantwortet auf 2.2.1: Die Sites-Vorlage, Karten, die zu ihrem Inhalt passen, Tabellenspalten und Werte nach Name

    Every site on my Sites board is Unknown with grey markers. The devices are online and sending, I can see them on the device…

  5. Geantwortet auf Berichtsintervall und Totband bei 300 Steuerungen im Feld ändern: Attribute oder Befehle?

    Commands to an offline unit only wait if you send them persistent, and that gives up after 7 days at most. Attributes are state,…

  6. Geantwortet auf Uno setzt sich jedes Mal zurück, wenn mein Pi-Skript /dev/ttyUSB0 öffnet

    +1 on sending a total. If you ever need consumption per hour, the history API and charts can work it out from the counter.

  7. Gestartet Two Unos over a pair of HC-05s so the one with the GSM modem reports both

    Home project. Uno A in the shed reads soil moisture for the greenhouse beds and a door contact. Uno B in the house has…

  8. Geantwortet auf Serielle Konsole zu meinem Pi-Gateway zeigt Escape-Codes statt Farben, und htop ist ein Durcheinander

    Try picocom instead of PuTTY? I always found PuTTY weird on serial.