Technology
Protocols and data explained: MQTT, Modbus, LoRaWAN, SNMP, certificates, time-series data and how SCADA screens work.
-
HMI display hierarchy: overview, unit, detail and diagnostic screens
Four screen levels take an operator from the whole plant to one sensor. What each level holds, why every branch should look the same, and the…
-
Downsampling time series data: what an hourly average hides
An hourly average keeps the trend and erases the one-minute spike that mattered. Keeping min, max and count per bucket is the cheap fix.
-
X.509 client certificate authentication for devices, and why shared passwords stop scaling
A password copied onto every device fails the day one unit goes missing. How X.509 client certificates work in TLS, and what a fleet needs to…
-
Webhook vs WebSocket vs polling: how another system should hear about new device data
Three ways for another system to hear about new device data, compared on firewalls, outages and catching up, with the pattern I use: a push channel…
-
Modbus register addressing: offsets, function codes and 32-bit floats
Why register 1 is sent as address 0, which function codes read and write each table, and how to find a float’s word order from one…
-
MQTT vs HTTP for IoT devices: choosing by what the device does
Pick MQTT or HTTP by the device’s job: how often it reports, whether it must hear commands at once, and what happens when its link drops.
-
How to read a P&ID: instrument tags, bubbles and line symbols
A reading order for piping and instrumentation diagrams: legend and notes first, then process lines, then each instrument tag, its bubble and its signal lines.
See your field data live this week
Start a trial in your region with your first devices, or book a demo and bring your own use case.

