New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

NIS2 scope explained: is your plant an essential or important entity?

Two tests decide NIS2 scope: a listed sector and at least medium size. This post walks through both, with the rules that move a plant between essential and important.

NIS2 scope comes down to two tests in Directive (EU) 2022/2555. Your organisation must carry out an activity listed in Annex I or Annex II, and it must be at least a medium-sized enterprise. Large organisations in Annex I sectors are essential entities by default; most other covered organisations are important entities, with lighter supervision and lower fine ceilings.

Article 2 of the NIS2 Directive sets the scope and Article 3 sorts entities.

Which sectors are covered by NIS2?

NIS2 lists 18 sectors: 11 “sectors of high criticality” in Annex I and 7 “other critical sectors” in Annex II. These entries are closest to plants and utilities.

ActivityAnnex
Electricity production and grids, oil, gas, hydrogen, district heating and coolingI (energy)
Drinking water supply and distribution, waste waterI
Pharmaceutical manufacturing (NACE Rev. 2 division 21)I (health)
Chemicals manufacture and distributionII
Food: wholesale distribution, industrial production and processingII
Medical devices, and NACE Rev. 2 divisions 26 to 30II (manufacturing)

The water entries exclude organisations for which water is a non-essential part of their general activity. For utilities, see cybersecurity for unattended pump stations.

What is the NIS2 size threshold for a medium enterprise?

NIS2 covers listed entities that are medium-sized or larger under Commission Recommendation 2003/361/EC. A small enterprise, with fewer than 50 staff and a turnover and/or balance sheet total of no more than EUR 10 million, is out unless a size-independent rule applies.

Size classAnnex IAnnex II
Small or microOut by defaultOut by default
Medium: under 250 staff, turnover up to EUR 50 million and/or balance sheet up to EUR 43 millionImportantImportant
Above the medium ceilingsEssentialImportant

Two rules can move a plant between rows. Article 6 of the Recommendation’s annex adds linked enterprises’ figures in full and partner enterprises’ in proportion, so a 40-person subsidiary of a large group can count as large, though NIS2 recital 16 lets member states weigh how independent it is. And a size class changes only after the ceilings are crossed in two consecutive accounting periods.

Does NIS2 apply to manufacturing and food?

It applies to food businesses in wholesale distribution and industrial production and processing, and to six named kinds of manufacturing, when the company is at least medium-sized. Both are Annex II entries, so these companies are important entities unless designated essential.

Manufacturing means medical devices, in vitro diagnostic devices and NACE Rev. 2 divisions 26 to 30: electronics, electrical equipment, machinery, motor vehicles and other transport equipment. Makers of devices on the EU’s public health emergency critical devices list sit in Annex I instead. A plant in another division can still fall under another entry, such as chemicals.

What changes between essential and important entities?

Supervision and fine ceilings differ; the duties do not. Both must take the risk-management measures of Article 21 and report a significant incident under Article 23: an early warning within 24 hours, a notification within 72 hours and a final report within one month of that notification.

Essential entities can face on-site inspections, random checks and regular security audits (Article 32); important entities are supervised ex post, on evidence or indication of non-compliance (Article 33). Maximum fines must reach at least EUR 10 million or 2% of worldwide annual turnover for essential entities and EUR 7 million or 1.4% for important ones, whichever is higher.

Article 21 names no standard. For control systems I would map its measures onto IEC 62443, starting with network segmentation and least privilege in OT.

How do you check your NIS2 scope?

Check in this order, with your national law open, because each member state transposes NIS2 itself.

  1. Match each legal entity’s activities against the annexes.
  2. Size each entity with the Recommendation’s rules, group figures and the two-period rule included.
  3. Check Article 2(2), which covers some entities regardless of size, such as a member state’s sole provider of an essential service.
  4. Register with your competent authority. Member states had to list their essential and important entities by 17 April 2025; entities give at least name, contact details including IP ranges, and sector.
  5. Report changes to those details within two weeks.

Frequently asked questions

Does NIS2 apply to companies based outside the EU?

Article 2(1) covers listed entities that provide services or carry out activities within the Union, and Article 26 places entities under the member state where they are established. For a company based outside the EU, the answer depends on its activities in the Union.

Did NIS2 replace the first NIS Directive?

Yes. Article 44 repeals Directive (EU) 2016/1148 with effect from 18 October 2024, the date from which member states had to apply NIS2. If a member state so provides, operators of essential services it identified before 16 January 2023 are essential entities.

Is a supplier to an essential entity covered by NIS2?

Being a supplier is not an entry in Annex I or II, so it does not by itself bring a company into scope. Covered entities must still manage supply chain security, including their relationships with direct suppliers (Article 21(2)(d)).

Share

See your field data live this week

Start a trial in your region with your first devices, or book a demo and bring your own use case.