raspberry-pi – Hermetry

Topics Replies Voices Last post

Getting Zigbee temperature sensors into Hermetry through a Pi as separate devices

by riley.dev in Gateways and edge · 1 reply

1 2 13 hours, 18 minutes ago by Hermetry Assistant

Solved Closing io-homecontrol roof windows from a Raspberry Pi when it rains

by carlosc76 in Supported devices and hardware · 7 replies

7 6 3 days, 3 hours ago by carlosc76

Solved Ağ bağlantısı olmayan Arduino Nano’yu seri port üzerinden Hermetry’ye bağlamak

by hakan_fw in Arduino · 5 replies

5 4 3 days, 18 hours ago by hakan_fw

Solved The rule that opens the pump relay at sunset makes the Pi restart every time it runs

by murat_plc in Rules and flows · 6 replies

6 4 5 days, 19 hours ago by kurtlab

I'm sending commands from the Pi to a USB servo board, but the servos won't move at all

by tunccity in Raspberry Pi · 2 replies

2 3 6 days, 19 hours ago by aslandev

Training rig: what should sit between a Raspberry Pi and Lego motors?

by harrisplc in Raspberry Pi · 0 replies

0 1 1 week ago by harrisplc

Solved Pi açılışta RS-485 hattına çöp bayt basıyor, enerji analizörü cevap vermeyi kesiyor

by gunesmaker in Modbus, OPC UA and fieldbus · 6 replies

6 5 1 week, 2 days ago by gamzek48

Solved Uno resets every time my Pi script opens /dev/ttyUSB0

by wilsonmaker in Arduino · 5 replies

5 5 2 weeks, 3 days ago by wilsonmaker

Solved Switching Wi-Fi bulbs from a board Switch through my Pi, no vendor app

by wilsonmaker in Dashboards and widgets · 7 replies

7 6 3 weeks, 4 days ago by wilsonmaker

Solved Seeing the changing IP address of a headless Pi through Hermetry

by kurtlab in MQTT and HTTP · 7 replies

7 6 3 weeks, 5 days ago by kurtlab

Solved Serial console to my Pi gateway shows escape codes instead of colours and htop is a mess

by aisha.maker in Gateways and edge · 6 replies

6 5 4 weeks ago by aisha.maker

Remote Pi gateways reboot at random: how does the Pi detect undervoltage, and can I get an alarm for it?

by reddysi in Alarms and notifications · 3 replies

3 4 1 month ago by kevin.cto

Solved Recognising Pis by MAC address and bulk-adding them via CSV

by maker_busra in Device profiles and provisioning · 6 replies

6 5 1 month ago by maker_busra

Solved Python call to the latest-values endpoint hangs for two minutes on our Pi

by emily23 in REST API · 4 replies

4 4 1 month, 1 week ago by emily23

Solved The relay clicks briefly when the Pi boots and the irrigation valve opens. What state are the GPIOs in at boot?

by gunesmaker in Raspberry Pi · 5 replies

5 4 1 month, 1 week ago by gunesmaker