gateway – Page 2 – Hermetry

Topics Replies Voices Last post

Solved Read-only filesystem on my RaspAP gateway Pi: what happens to the buffered readings?

by wilsonmaker in Gateways and edge · 8 replies

8 7 4 months, 3 weeks ago by wilsonmaker

Solved PoE for a Pi 3B gateway in the field shed, which has no PoE header

by lynchlab in Gateways and edge · 3 replies

3 3 6 months, 1 week ago by lynchlab

Solved Açık kaynak bir IO-Link master yığını var mı, yoksa hazır master alıp Modbus’tan mı okumalı?

by oguz59 in Modbus, OPC UA and fieldbus · 7 replies

7 6 6 months, 2 weeks ago by oguz59

Solved Pi gateway: “RTNETLINK answers: File exists” on ifup eth0 and keepalive drops after boot

by brian14 in Gateways and edge · 6 replies

6 5 7 months, 3 weeks ago by brian14

Solved BLE tags draw 40 uA asleep instead of 2, and Hermetry shows them offline between reports

by smithops in Device profiles and provisioning · 5 replies

5 4 7 months, 3 weeks ago by smithops

Solved Twelve Nanos across an 80 m greenhouse: least wiring back to one gateway?

by thompsonfw in Modbus, OPC UA and fieldbus · 7 replies

7 6 8 months ago by thompsonfw

Solved ESP8266 room nodes, a Pi in the middle, Hermetry on top: sane design?

by pretoriusfm in Gateways and edge · 3 replies

3 3 8 months, 3 weeks ago by pretoriusfm

Solved Going from 5 hand-built BLE tags to 500: certified module or our own nRF52 layout?

by aisha.maker in Supported devices and hardware · 7 replies

7 5 9 months ago by emily23

Solved Vendor quote says ‘Bluetooth 4.0’ sensors, another one says ‘BLE’. Same thing? Will either work with Hermetry?

by ops_keisha in First steps · 5 replies

5 4 11 months, 3 weeks ago by wilsonmaker

Solved Z-Wave S2 on my Pi gateway: which nodes really need it?

by sneha_dev in Gateways and edge · 5 replies

5 4 1 year, 1 month ago by sneha_dev

Solved painlessMesh root node as the only link to Hermetry: how should the other nodes show up?

by connor92 in Gateways and edge · 5 replies

5 4 1 year, 4 months ago by connor92