New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

Port forwarding security risks for plant equipment, and what to do instead

A forwarded port hands a plant device to anyone who finds it. How quickly scans find it, why UPnP opens ports nobody chose, and remote access with no inbound port.

Port forwarding security risks come from one fact: a forwarded port lets anyone on the internet who finds it talk directly to a device on the plant network. OT devices lack authentication built for that exposure, and internet-wide scans find open ports quickly. Outbound-only connections give the same remote access with no inbound port open.

Why is an open port to a PLC or panel dangerous?

A port forward hands the device itself to the internet, with whatever login and software flaws it has. In its May 2025 fact sheet Primary Mitigations to Reduce Cyber Threats to Operational Technology, CISA lists “Remove OT connections to the public internet” first, because OT devices lack authentication and authorization methods resistant to modern threats.

Some field protocols have no login at all. Modbus/TCP, for example, accepts requests from anyone who reaches port 502, as I described in water utility cybersecurity. A forwarded operator panel asks for a password, but its web server was built for the plant network.

How fast are open ports found by scanners?

Fast enough to treat an open port as found on the day it opens. Researchers at the University of Michigan showed in 2013 that a single machine can survey the entire IPv4 address space in under 45 minutes, and CISA notes that exposed OT devices are quickly found by searching for open ports on public IP ranges with search engine tools.

Moving the service to an unusual port number only changes which scan finds it. You will not be told when a scan has listed your device.

Is UPnP a security risk?

Yes, on a site router it is. Universal Plug and Play (UPnP) lets devices on the network discover each other and set up communication on their own, and CISA’s home network security guidance warns that malware inside a network can use it to bypass the router’s firewall and advises disabling it unless there is a specific need.

On a plant router, I switch UPnP off and read the port forwarding table after every commissioning visit; a forward without a named owner and reason gets closed.

How do you access a device remotely without port forwarding?

Make the site connect out, never in. A gateway opens an encrypted connection to a known service, and signed-in users reach the site through it.

PatternInbound port on siteWho can reach the site
Port forward to the deviceOne per deviceAnyone who finds the address
VPN server on siteOne, on the VPN endpointAnyone, but only the VPN answers
Outbound tunnel through a brokerNoneOnly users the broker lets in
Outbound data only (MQTT over TLS)NoneNobody; the device opens every connection

Where remote access is essential, CISA advises a private IP network connection and a VPN with a strong password and phishing-resistant multifactor authentication for remote users. Whatever the pattern, a remote user should reach only the devices their job needs, as in least privilege in OT.

Hermetry connects field devices to live dashboards, rules and alerts: IoT telemetry and SCADA in one platform. Hermetry Edge runs on licensed gateways and sends site data over one outbound TLS connection with the gateway’s own device certificate, so nothing on site needs to accept connections from the internet. A licensed router’s web panel opens through a tunnel the router dials out when asked, with no fixed IP and no open ports, only if the router’s owner allowed it on the router; a session ends after 30 minutes without use or 4 hours in total, as the remote access page describes.

Where that outbound link should sit in the plant network is covered in IoT network segmentation for plants.

Frequently asked questions

Is port forwarding safe if the device has a strong password?

A strong password helps only where the device asks for one on that port, and some field protocols never do. The device’s own software stays exposed to every scan and exploit attempt. I treat a password as a second layer, never as the reason to open a port.

How do I check what a site already exposes?

Start with the site router: read its port forwarding table and its UPnP mapping list, and note every rule with its owner. Then, with permission, test the site’s public address from outside the network. Anything that answers and has no named owner and reason should be closed.

Does a cellular router make port forwarding safer?

No. A router with a public address on its mobile link exposes forwarded ports the same way a fixed line does. Some mobile subscriptions give routers private addresses, which blocks inbound connections as a side effect, but that is a property of the subscription, not a control you set.

Share

See your field data live this week

Start a trial in your region with your first devices, or book a demo and bring your own use case.