emily23
@smith-e · Joined January 2026
Facility manager · hospitality
- Topics
- 4
- Replies
- 24
- Points
- 0
Forum Replies Created
Following, I want to do the same for our kitchen fridges.
What are the actual divider values on your board, and what’s the ESP32’s ADC reading at 12.6 V?
Running for a week now! “Sunrise and sunset need this place’s location” was exactly the message I got, added the coordinates and it saved. I also added a second off rule at 23:05 because one socket misses the code now and then. Staff noticed nothing except the heaters are just on when they should be.
That was it, Current value was bound to the command parameter instead of a reported key. Contractor added the publish after the button press and a repeat every 5 minutes with the CO2 reading. Slider follows the wall buttons now. Ask before running is off, the events team thanks you.
ok I ordered the transmitter + receiver pair. So the Pi part is clear, but how do I trigger it from Hermetry at sunset?
+1 from us too. The events trick is a good tip for now.
Not my field at all, but following, our hotel has a grease trap pump that’s always clogging.
No tokens per tag, perfect. Let me know when you have a quote.
Hotel side here (not that group, but same need). Whatever you do, I can’t be typing 500 device tokens into Hermetry.