New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

Ayşe Kurt

kurtlab

@aysekurt · Joined November 2025

Newcomer

Mühendislik öğrencisi · üniversite

Topics
8
Replies
33
Points
0
Newcomer10 points to Member

Forum Replies Created

Viewing 15 posts – 16 through 30 (of 33 total)

Translated from Türkçe by AI ·

It worked! With increase, plug 1 gave 21.4 Wh/day, plug 2 gave 11.8, and plug 3 gave 27.3. I had computed 21.6 with avg × 24, which was close, but plug 2 had an hour-long disconnection in between, and there the difference was up to 2 Wh. I also noted the UTC issue in the report. Many thanks 🙏

♥ 2

Translated from Türkçe by AI ·

Thank you so much, teacher. I asked the teacher, and there is already a LoRaWAN gateway on the department’s roof, nobody told me 🙂 I ordered a RAK3172, and when it arrives I’ll add it with OTAA and write back. I’ll keep the ESP32 on the bench for testing.

♥ 0

Translated from Türkçe by AI ·

Oh right, so I’m multiplying by 8640. Then should I do avg × 24? I need to explain the formula in the report, my supervisor will ask “why”.

♥ 0

Translated from Türkçe by AI ·

It works, thanks sir. I ran into one thing: the hidden part of the link after the # disappears from the address bar once the page opens. When I copied what was in the address bar and put it into autostart, the page did not open after the Pi restarted. Once I wrote the full link I had copied into the script, it was fixed. The screen has been on for a week, with no login page.

♥ 0

Translated from Türkçe by AI ·

The session was already left open, yet it still drops every few days. Also, I don’t really like it staying open with my lab account; if someone in the corridor touches it, they could see everything.

♥ 0

Translated from Türkçe by AI ·

That may be right, I was measuring the DevKit itself. But there is another problem: the field is about 2 km from the faculty building, and there is no Wi-Fi there. I should have said that at the start, sorry about that.

♥ 1

UART_DEF ile 9600 yaptım, bozuk karakterler bitti. AMS1117 ekleyince WIFI DISCONNECT de kesildi. Sonra Hakan Bey’in dediği gibi Uno’yu çıkardım, ESP-01’e DS18B20 bağlayıp doğrudan HTTPS ile gönderiyorum. Telemetry sekmesinde değerler 30 saniyede bir geliyor. Teşekkürler 🙏

♥ 2
Viewing 15 posts – 16 through 30 (of 33 total)