Ouverts Banc de formation : que mettre entre un Raspberry Pi et les moteurs Lego ?

Slightly unusual one. I'm building a training rig for our apprentices: a small Lego Technic conveyor with a colour sensor at the end, so…

il y a 1 semaine

Ouverts PIC24FJ128GA202 Modbus RTU slave over MAX485 never answers the gateway

Our test rigs have a custom board with a PIC24FJ128GA202 that should act as a Modbus RTU slave (address 7, 19200 8E1) so a…

il y a 1 semaine et 2 jours

Réponses à Ligne d'emballage 3 : presse, cellule robot, contrôle, conditionnement et palettisation sur un seul schéma

Zones with a title per section is a good idea. Doing the same for our filling line.

il y a 1 semaine et 4 jours

Réponses à L'onglet Commands sur un contrôleur neuf, avant la première commande

Who can send what here? Our operators are all Users.

il y a 2 semaines et 4 jours

Réponses à Serhat, SCADA drawings and the field side under them

Hello Serhat. Automotive here. Is there anything in the library for assembly lines, or is it mostly tanks and pumps?

il y a 2 mois et 2 semaines

Réponses à Measuring 1250 °C in a pottery kiln and getting told when a firing runs away

MAX6675 tops out at 1024 °C by design, that's your 1023.75.

il y a 3 mois et 3 semaines

Réponses à Reject button at a rework station misses quick presses. Also, can Forge count these for us?

Interrupt version is on the station since Monday. Hand tally 52, Hermetry 52 on Tuesday's shift. I'd also been publishing "rejects this minute" and…

il y a 4 mois et 1 semaine

Ouverts Reject button at a rework station misses quick presses. Also, can Forge count these for us?

We have a rework station at the end of a door panel line. When an operator rejects a panel they press a big mushroom…

il y a 5 mois et 2 semaines