Student, first IoT project: a small weather station for our hostel that sends temperature, humidity and pressure to Hermetry every 5 minutes. I went to order an ESP32 and found ESP32-WROOM-32, WROOM-32E, WROOM-32UE, WROVER-E, MINI-1… and N4, N8, N16R8 at the end. What does WROOM even mean? I searched and found three different answers. Which one should a beginner pick for something like this?
I always assumed WROOM was „Wireless ROOM“ or something. Never checked.
WROVER has extra PSRAM on the module, WROOM doesn’t. For a weather station you won’t need PSRAM.
ok so WROOM then. But E or UE?
I use a DevKitC board with a WROOM-32E on it for everything at home, plug in USB and go.
Depends where the box goes. If it’s a metal or IP65 enclosure on a wall, take the UE and an external antenna. The PCB antenna on the E is fine on a desk and poor inside metal.
+1 to Grace. We lost a week on a site job because of a PCB antenna inside a steel cabinet.
As far as I know Espressif has never officially said what WROOM stands for, so don’t trust the three answers you found. In practice it’s their name for a module family: the chip, flash, crystal and antenna on one shielded board you can solder on.
The suffixes:
- WROOM = module without PSRAM, WROVER = with PSRAM, MINI = smaller footprint.
- -E = ESP32 chip revision 3 (fixes several early silicon bugs). Buy E, not the old plain -32.
- U in the name (32UE) = u.FL connector for an external antenna instead of the PCB antenna.
- N4/N8/N16 = MB of flash, R8 = MB of PSRAM.
For your station: a DevKitC board with a WROOM-32E N4 to start, like Aisha has. 4 MB flash leaves room for two OTA partitions if you ever want to update it over the air. If the box ends up outdoors in a metal housing, switch to the 32UE as Grace said. Wake every 5 minutes, send one HTTPS POST to Hermetry’s device API, sleep: that keeps the board cool too, so it doesn’t heat the sensor.
Ordered a DevKitC with WROOM-32E N4. The box will be a plastic one under the roof edge, so PCB antenna it is. Thanks Brian, and everyone, the U and E part was what confused me most.
- Du musst angemeldet sein, um auf dieses Thema antworten zu können.
Mitdiskutieren
Melde dich an, um Fragen zu stellen und zu beantworten, hilfreiche Beiträge mit „Gefällt mir“ zu markieren und die Antwort zu kennzeichnen, die dein Problem gelöst hat. Jeder Beitrag bringt Punkte und Stufen.