New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

Design the dashboard before the devices arrive: sample data and board packages

Sample data lets you build and review a board while the devices are still on order. What to settle early, how to rebind each card later, and how to move the finished board to another organisation.

To design a dashboard before devices arrive, bind each card to sample data, settle the layout, pages and parameters with the people who will use the board, then rebind each card to the real data once the devices report. Hermetry 2.1.1 (9 October 2026) added a sample data source for this, and board packages that carry every card of a board.

I would rather argue about a board’s layout while it shows sample values than after people depend on it. Nobody can tell whether a chart is too small or a table has the wrong columns while the cards are empty.

How do you build a dashboard before devices are connected?

Bind each card to a sample source instead of a device. In a card’s Data tab, the option Also list the sample data and the developer sources shows the sources meant for testing, so every widget has something real-looking to draw while the devices are still on order.

A widget declares slots, which say what it needs and never where it comes from. A gauge needs one value, a line chart a series, a table rows, and a sample source fills the same slot a device will fill later. The docs say to leave the sample sources off for production boards, so I treat every sample binding as a placeholder with a replacement date.

What should you settle before connecting devices to the dashboard?

Settle what is expensive to change once people rely on the board: its structure, its parameters and the names of the values.

  • Grid and pages. A board has 12 or 24 grid columns (12 by default) and a main page plus up to 20 more. Changing the column count later rescales every card.
  • Parameters. A board holds up to 16 value parameters and 48 parameters in all. Pick keys you will keep, because renaming a key breaks the cards and links that use it.
  • Look and toolbar. The board settings set card defaults and the toolbar items viewers get. A card’s own settings win over the board defaults, so set the defaults first.
  • Value names and units. Agree the telemetry key names and units now with whoever sets up the devices, and use the same names on the sample cards.

Then sit two or three operators in front of it and watch what they click first.

How do you replace sample data with real device data?

Rebind the cards one by one once the devices report.

  1. Open the board and select Customise.
  2. Open a card’s Widget settings and go to its Data tab.
  3. For each slot, replace the sample source with the source and query that hold the real values, then fill its fields.
  4. Select Save, repeat for every card that still reads a sample source, then select Done.

How slots, sources and board parameters fit together is covered in data sources and parameters.

How do you move a finished dashboard to another organisation?

Export it as a board package and import it in the other organisation, for example when a board built in a test organisation goes to the one that will run it. In the board menu, Export gives a .board.json for that board only, or Export with linked a .boards.json that also carries the boards it opens.

The file holds the board’s parameters and each card’s place, settings, data bindings and actions. It leaves out the organisation, people, sharing and revision history. The import starts with a dry run that writes nothing, and a binding to a data source the other organisation lacks is dropped while the rest of the card comes across. See board templates and board files for the outcomes, and create and organise boards for grid, pages and board settings.

Frequently asked questions

Can I undo a whole round of layout changes on a Hermetry board?

Yes. In Customise mode, Discard puts the whole board back as it was when you selected Customise, after a dialog that counts the changes. Sharing, the home setting and the board’s address are not part of a discard.

What happens if two people customise the same board at once?

Both can work on it. A save that meets someone else’s newer change is refused with a message that the dashboard changed elsewhere and was reloaded. A card drawer that meets a newer save of the same card offers Reload (discard mine) or Overwrite theirs.

Who can create a dashboard in Hermetry?

Any member with the permission Create and arrange your own dashboards can create personal boards. Sharing a board with everyone in the workspace needs Manage shared dashboards, and other members can make a personal copy of a shared board.

Share

See your field data live this week

Start a trial in your region with your first devices, or book a demo and bring your own use case.