New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

GPS vehicle trackers over cellular: tracking trailers without draining the battery

Getting a fix is the easy part. What a fleet operator decides next, reporting by motion, a cell-based fallback and what a parked trailer sends, is what sets the battery life.

A GPS vehicle tracker on cellular pairs a satellite receiver for position with a cellular modem that sends the fix to a server. On a trailer, battery life depends less on the modem than on the reporting policy: report often while moving, rarely while parked, and fall back to a cell-based estimate when the sky is blocked.

Most tracker questions stop at getting a fix out of a modem. I want to cover the decisions after that, for logistics fleets whose trailers sit for days.

How do vehicle tracking devices connect to the internet?

Through a cellular modem and a SIM, sending each position as a small message over mobile data. MQTT or HTTP both work for the message itself; I compared them in MQTT vs HTTP for IoT devices.

For battery-powered trackers, the two LTE-based IoT technologies from 3GPP Release 13 are LTE-M (eMTC, LTE Cat M1) and NB-IoT. In 3GPP’s Release 13 overview, NB-IoT is simplified further, with reduced data rate, bandwidth and mobility support, while LTE-M peaks around 1 Mbps. For a trailer that crosses cells all day, I would choose LTE-M first.

Both include a power saving mode (PSM) and extended discontinuous reception (eDRX), which let the modem sleep between transmissions. The price is reachability: in idle mode, an LTE-M device on eDRX listens for the network at intervals of up to about 44 minutes, so a command sent to a sleeping tracker waits.

How often should a GPS tracker report?

Tie reporting to motion. An accelerometer tells the tracker when the trailer starts and stops, so the satellite receiver and modem only work hard while it is moving.

StateWhat to sendExample rate
Starts movingA position at once, flagged as a startOne message
MovingPosition, speed, headingEvery 60 seconds, or on a sharp turn
StopsFinal position, flagged as a stopOne message
ParkedHeartbeat with battery voltage and last positionEvery 6 hours

With those example rates, a 10-hour driving day is 600 positions, while a parked day is 4 heartbeats. A tracker that reports every minute around the clock sends 1,440 messages a day whether the trailer moves or not.

Can a tracker find its location without GPS?

Yes, roughly. The tracker can report the identity of the cell it is attached to, and a server can look that cell up in a database of cell positions. The estimate is much coarser than a satellite fix, and the error grows where cells are large, such as in the countryside.

Satellite fixes fail inside steel containers, warehouses and tunnels, and under a badly placed antenna. So I tag every position with its source, satellite or cell, and show a cell estimate differently from a satellite fix on the map.

Hermetry connects field devices to live dashboards, rules and alerts. Its map cards plot the latest lat and lng of many devices as markers coloured by status, outline zones of at least three corners, and draw routes with replay controls at 1×, 2×, 5× or 10×. When each route point carries a time, the replay follows the clock.

What should a parked trailer send?

A parked trailer should send little, but enough to prove it is alive: battery voltage, the last known position, and an immediate message if it moves without being expected to. A refrigerated trailer adds its cargo temperature, because the load still has to stay cold while the truck is parked. Inside a yard, other trackers are an option; see yard tracking of trailers with LoRaWAN and BLE trackers.

Frequently asked questions

Does a GPS tracker need a SIM card?

A cellular tracker does, because it sends its position over a mobile network. The SIM can be a physical card or an embedded one. Trackers without cellular store positions and upload them later, or use a different network such as LoRaWAN, which suits yards and depots that have their own gateways.

Why does my tracker show the trailer in the wrong place?

Usually because the last position came from a cell estimate, or from a stale fix taken before the trailer entered a building. Check the fix type and the age of the position before trusting the pin, and look at where the antenna sits on the trailer.

How long can a trailer tracker run on a battery?

It depends on the reporting policy far more than on the hardware. 3GPP set a design target of about ten years on a 5 Wh battery for LTE-M and NB-IoT, depending on traffic and coverage. Every message costs energy, so the reporting policy is the part you control.

Share

See your field data live this week

Start a trial in your region with your first devices, or book a demo and bring your own use case.