New: the AI firewall watches the whole platform and explains each incident in plain words. See how it works

From overview to device in one click: card actions and drill-down

Card actions turn an overview board into a way in: click a row or a marker and the board follows that device, opens its detail page or opens another board.

To drill down to a device from an overview board in Hermetry, give a card a click action. Set board parameters makes the other cards follow the clicked device, Show a page of this board opens a detail page for it, and Open a board opens another board with that device preselected. Card actions came with Hermetry 2.0.1.

An overview board answers “is anything wrong?” for many devices at once. The next question is always “which one, and what is it doing?”, and an operator should not have to leave the board and hunt through menus to answer it. Serhat’s post on HMI display hierarchy covers how the overview, unit and detail levels relate. Card actions are the click that moves an operator between them.

What can a card do when it is clicked?

A card can narrow the board, open a page, open another board, change the time window or go back. You set this in Customise mode, in the card’s settings under What happens on a click (actions), as a list of actions that run in order.

The click can come from the card itself, a header button, a table row, a map marker, a chart or a symbol in a process drawing. The actions I use most for drill-down are these:

  • Set board parameters changes a parameter in place, for example the device the other cards follow.
  • Show a page of this board opens a page as a page, a side panel, a dialog or a popover.
  • Open a board opens another board with its parameters preselected.
  • Go back walks back along the drill-down trail.

How do you build a drill-down from an overview to one device?

Make a detail page that takes a device parameter, then make the overview’s rows open it with the clicked device. The full reference is card actions and drill-down boards.

  1. Customise the board and add an entity parameter, device, under Manage parameters… (see dashboard parameters).
  2. Open Manage pages… and Add page. Give it a title such as Device {{param_device}}, which reads “Device P-201” once a device is picked.
  3. Add device as a starred parameter, so the page opens only from an action that gives it.
  4. Untick In menu to make it a detail page, and choose Shown as: Side panel.
  5. Select Save pages, then move a gauge and a line chart onto the page and bind them to the device parameter.
  6. On the overview’s table, under When a row is clicked, add Show a page of this board, pick the page, and set device from the clicked row.

A board can have up to 20 pages after its main page, so one overview board can carry several detail pages. The board editing guide covers pages and Customise mode in full.

Side panel or another board for device details?

I use a side panel when the operator should keep the overview in view, and another board when the detail is big enough to deserve its own layout. A page opened by an action opens over the current page; up to 8 can stack, each keeping the values it was opened with, and a side panel offers Open as full page.

Open a board suits a chain such as all sites, then one site, then one pump. The boards you came through show as a breadcrumb at the top and are kept in the address (?trail=…), so Go back and the browser’s back button both return through them.

Bookmarks can break the way back. A bookmark saved without the trail starts a new trail, so an operator who bookmarks the third board directly lands there with nothing to go back to. I tell teams to bookmark the first board of the chain.

Frequently asked questions

Can a click on a dashboard card start a pump?

No. In Hermetry a card click never runs a command, and the editor refuses one there. Run a command is available only from controls, table row buttons and symbols in process drawings, and commands ask for confirmation by default. Put a button next to the value card if operators need to act from the board.

What happens if a detail page opens without a device?

A page whose starred parameter has no value says “Pick device to see this page” instead of showing empty cards. The editor also refuses to save a Show a page of this board action that would leave a needed parameter without a value, so the mistake usually shows up while you build the board.

Can an action ask before it runs?

Yes. Ask before running adds a confirmation before Set board parameters, Show a page of this board, Open a board and Go back. Any action not on the card click can also carry a show condition, so a header button appears only while a board parameter matches.

Share

See your field data live this week

Start a trial in your region with your first devices, or book a demo and bring your own use case.