Nouveau : le pare-feu IA surveille toute la plateforme et explique chaque incident en termes simples. Découvrez comment ça marche

wilsonmaker

@wilson-m · Membre depuis juillet 2025

Nouveau

Maker · home automation · Nottingham · new to IoT

Sujets
14
Réponses
71
Points
0
Nouveau10 points pour Membre

Activité récente

  1. Réponses à ESP8266 comme broker MQTT local pour que les capteurs continuent de fonctionner quand Internet coupe ?

    No, Hermetry creates the child the first time the gateway mentions it.

  2. Réponses à ESP8266 comme broker MQTT local pour que les capteurs continuent de fonctionner quand Internet coupe ?

    I tried exactly the uMQTTBroker thing at home last year and gave up on it, then did this, which has been solid for 8…

  3. Réponses à La Uno se réinitialise à chaque ouverture de /dev/ttyUSB0 par mon script Pi

    Thanks James. -hupcl alone wasn't enough, the first open after a reboot still reset it, like you said. Put the 10 µF cap on…

  4. Réponses à Piloter des ampoules Wi-Fi depuis un Switch de la carte via mon Pi, sans application du fabricant

    Working! Got two WiZ bulbs. The command list filled up as soon as I added light.set to the catalog. First version the Switch only…

  5. Réponses à Vingt sondes DS18B20 sur un seul Pi : pertes au-delà de huit capteurs et comment nommer les clés

    Two buses on GPIO4 and GPIO17, 2.2k each, and I re-did the run as a line along the racks. 20 of 20 for two…

  6. Réponses à Uno en esclave I2C envoyant des flottants à un Mega et recevant des commandes : les valeurs sortent corrompues

    Works first time, which never happens to me. Readings are clean and the valve opens when the Mega sends 1. I'd been sending text…

  7. Ouverts La Uno se réinitialise à chaque ouverture de /dev/ttyUSB0 par mon script Pi

    Bit of a beginner so sorry if this is obvious. I have an Arduino Uno clone (CH340 chip) plugged into a Raspberry Pi with…

  8. Réponses à Vingt sondes DS18B20 sur un seul Pi : pertes au-delà de huit capteurs et comment nommer les clés

    3 wires, 3.3V from the Pi. Legs are 30 cm to 1 m, it's more of a star than a line I guess.