Novedad: el cortafuegos de IA supervisa toda la plataforma y explica cada incidente con palabras sencillas. Vea cómo funciona

wilsonmaker

@wilson-m · Se unió el julio 2025

Recién llegado

Maker · home automation · Nottingham · new to IoT

Temas
14
Respuestas
71
Puntos
0
Recién llegado10 puntos para Miembro

Actividad reciente

  1. Respondidos ¿ESP8266 como broker MQTT local para que los sensores sigan funcionando cuando se cae internet?

    No, Hermetry creates the child the first time the gateway mentions it.

  2. Respondidos ¿ESP8266 como broker MQTT local para que los sensores sigan funcionando cuando se cae internet?

    I tried exactly the uMQTTBroker thing at home last year and gave up on it, then did this, which has been solid for 8…

  3. Respondidos Uno resets every time my Pi script opens /dev/ttyUSB0

    Thanks James. -hupcl alone wasn't enough, the first open after a reboot still reset it, like you said. Put the 10 µF cap on…

  4. Respondidos Cambiar bombillas Wi-Fi desde un Switch de la placa a través de mi Pi, sin app del fabricante

    Working! Got two WiZ bulbs. The command list filled up as soon as I added light.set to the catalog. First version the Switch only…

  5. Respondidos Veinte sondas DS18B20 en una sola Pi: caídas más allá de ocho sensores y cómo nombrar las claves

    Two buses on GPIO4 and GPIO17, 2.2k each, and I re-did the run as a line along the racks. 20 of 20 for two…

  6. Respondidos Uno como esclavo I2C enviando flotantes a un Mega y recibiendo comandos: los valores llegan alterados

    Works first time, which never happens to me. Readings are clean and the valve opens when the Mega sends 1. I'd been sending text…

  7. Iniciados Uno resets every time my Pi script opens /dev/ttyUSB0

    Bit of a beginner so sorry if this is obvious. I have an Arduino Uno clone (CH340 chip) plugged into a Raspberry Pi with…

  8. Respondidos Veinte sondas DS18B20 en una sola Pi: caídas más allá de ocho sensores y cómo nombrar las claves

    3 wires, 3.3V from the Pi. Legs are 30 cm to 1 m, it's more of a star than a line I guess.