wilsonmaker
@wilson-m · Mitglied seit Juli 2025
Maker · home automation · Nottingham · new to IoT
- Themen
- 14
- Antworten
- 71
- Punkte
- 0
Letzte Aktivität
-
Geantwortet auf ESP8266 als lokaler MQTT-Broker, damit die Sensoren weiterlaufen, wenn das Internet ausfällt?
No, Hermetry creates the child the first time the gateway mentions it.
-
Geantwortet auf ESP8266 als lokaler MQTT-Broker, damit die Sensoren weiterlaufen, wenn das Internet ausfällt?
I tried exactly the uMQTTBroker thing at home last year and gave up on it, then did this, which has been solid for 8…
-
Geantwortet auf Uno setzt sich jedes Mal zurück, wenn mein Pi-Skript /dev/ttyUSB0 öffnet
Thanks James. -hupcl alone wasn't enough, the first open after a reboot still reset it, like you said. Put the 10 µF cap on…
-
Geantwortet auf Wi-Fi-Lampen über einen Pi mit einem Board-Switch schalten, ohne Hersteller-App
Working! Got two WiZ bulbs. The command list filled up as soon as I added light.set to the catalog. First version the Switch only…
-
Geantwortet auf Zwanzig DS18B20-Sensoren an einem Pi: Ausfälle ab acht Sensoren und wie man die Schlüssel benennt
Two buses on GPIO4 and GPIO17, 2.2k each, and I re-did the run as a line along the racks. 20 of 20 for two…
-
Geantwortet auf Uno als I2C-Slave sendet Floats an einen Mega und nimmt Befehle entgegen: Werte kommen verstümmelt an
Works first time, which never happens to me. Readings are clean and the valve opens when the Mega sends 1. I'd been sending text…
-
Gestartet Uno setzt sich jedes Mal zurück, wenn mein Pi-Skript /dev/ttyUSB0 öffnet
Bit of a beginner so sorry if this is obvious. I have an Arduino Uno clone (CH340 chip) plugged into a Raspberry Pi with…
-
Geantwortet auf Zwanzig DS18B20-Sensoren an einem Pi: Ausfälle ab acht Sensoren und wie man die Schlüssel benennt
3 wires, 3.3V from the Pi. Legs are 30 cm to 1 m, it's more of a star than a line I guess.

