brian14
@russo-b · Membre depuis décembre 2025
IT and security admin · energy
- Sujets
- 4
- Réponses
- 7
- Points
- 0
Activité récente
-
Réponses à Capteurs en extérieur à la limite du Wi-Fi : pourquoi cela ralentit-il autant, et que faire ?
Thanks, the explanation helped me write it up for my manager. Batched to one message every 2 minutes with 4 readings and keepalive 90…
-
Réponses à Capteurs en extérieur à la limite du Wi-Fi : pourquoi cela ralentit-il autant, et que faire ?
2.4 GHz, 20 MHz channels. The ESP32 can't do 5 GHz anyway.
-
Ouverts Capteurs en extérieur à la limite du Wi-Fi : pourquoi cela ralentit-il autant, et que faire ?
IT admin, I look after networks more than sensors. We have 8 ESP32 sensor boxes in an outdoor storage yard, at the edge of…
-
Réponses à Lire le journal d'audit : qui a fait quoi, et vérifier que personne ne l'a modifié
We'd rather push high severity events into our SIEM than poll the API. Any hook for that?
-
Réponses à Modules radio Si4463 nus : où se cachent les exemples Arduino fonctionnels ?
SDN was floating. Tied it through the library pin and init succeeded on the first try. Sender at the tank, receiver on a second…
-
Ouverts Modules radio Si4463 nus : où se cachent les exemples Arduino fonctionnels ?
Different project from my pigpio question. We have a water tank about 900 m from the building, no power to spare and no cable.…
-
Fixed. Interfaces file cleaned, static config in dhcpcd.conf with noipv4ll, rebooted the Pi ten times in a row this morning and the gateway connected…
-
Yes, ifdown says interface eth0 not configured and ifup fails the same way afterwards.

