Novedad: el cortafuegos de IA supervisa toda la plataforma y explica cada incidente con palabras sencillas. Vea cómo funciona

brian14

@russo-b · Se unió el diciembre 2025

Recién llegado

IT and security admin · energy

Temas
4
Respuestas
7
Puntos
0
Recién llegado10 puntos para Miembro

Actividad reciente

  1. Respondidos Sensores en el patio en el límite del Wi-Fi: ¿por qué va tan lento y qué hago al respecto?

    Thanks, the explanation helped me write it up for my manager. Batched to one message every 2 minutes with 4 readings and keepalive 90…

  2. Respondidos Sensores en el patio en el límite del Wi-Fi: ¿por qué va tan lento y qué hago al respecto?

    2.4 GHz, 20 MHz channels. The ESP32 can't do 5 GHz anyway.

  3. Iniciados Sensores en el patio en el límite del Wi-Fi: ¿por qué va tan lento y qué hago al respecto?

    IT admin, I look after networks more than sensors. We have 8 ESP32 sensor boxes in an outdoor storage yard, at the edge of…

  4. Respondidos Leer el registro de auditoría: quién hizo qué y comprobar que nadie lo editó

    We'd rather push high severity events into our SIEM than poll the API. Any hook for that?

  5. Respondidos Módulos de radio Si4463 sin carcasa: ¿dónde están los ejemplos de Arduino que funcionan?

    SDN was floating. Tied it through the library pin and init succeeded on the first try. Sender at the tank, receiver on a second…

  6. Iniciados Módulos de radio Si4463 sin carcasa: ¿dónde están los ejemplos de Arduino que funcionan?

    Different project from my pigpio question. We have a water tank about 900 m from the building, no power to spare and no cable.…

  7. Respondidos Gateway con Pi: "RTNETLINK answers: File exists" en ifup eth0 y caídas de keepalive tras el arranque

    Fixed. Interfaces file cleaned, static config in dhcpcd.conf with noipv4ll, rebooted the Pi ten times in a row this morning and the gateway connected…

  8. Respondidos Gateway con Pi: "RTNETLINK answers: File exists" en ifup eth0 y caídas de keepalive tras el arranque

    Yes, ifdown says interface eth0 not configured and ifup fails the same way afterwards.