Nouveau : le pare-feu IA surveille toute la plateforme et explique chaque incident en termes simples. Découvrez comment ça marche

harrisplc

@lauraharris78 · Membre depuis février 2025

Nouveau

Automation engineer · automotive

Sujets
5
Réponses
9
Points
0
Nouveau10 points pour Membre

Activité récente

  1. Ouverts Banc de formation : que mettre entre un Raspberry Pi et les moteurs Lego ?

    Slightly unusual one. I'm building a training rig for our apprentices: a small Lego Technic conveyor with a colour sensor at the end, so…

  2. Ouverts PIC24FJ128GA202 esclave Modbus RTU via MAX485 ne répond jamais à la passerelle

    Our test rigs have a custom board with a PIC24FJ128GA202 that should act as a Modbus RTU slave (address 7, 19200 8E1) so a…

  3. Réponses à Ligne d'emballage 3 : presse, cellule robot, contrôle, conditionnement et palettisation sur un seul schéma

    Zones with a title per section is a good idea. Doing the same for our filling line.

  4. Réponses à L'onglet Commands sur un contrôleur neuf, avant la première commande

    Who can send what here? Our operators are all Users.

  5. Réponses à Serhat, les schémas SCADA et le terrain en dessous

    Hello Serhat. Automotive here. Is there anything in the library for assembly lines, or is it mostly tanks and pumps?

  6. Réponses à Mesurer 1250 °C dans un four de potier et être alerté lorsqu'une cuisson s'emballe

    MAX6675 tops out at 1024 °C by design, that's your 1023.75.

  7. Réponses à Le bouton Reject d'un poste de retouche rate les appuis rapides. Par ailleurs, Forge peut-il compter ces événements pour nous ?

    Interrupt version is on the station since Monday. Hand tally 52, Hermetry 52 on Tuesday's shift. I'd also been publishing "rejects this minute" and…

  8. Ouverts Le bouton Reject d'un poste de retouche rate les appuis rapides. Par ailleurs, Forge peut-il compter ces événements pour nous ?

    We have a rework station at the end of a door panel line. When an operator rejects a panel they press a big mushroom…