Nouveau : le pare-feu IA surveille toute la plateforme et explique chaque incident en termes simples. Découvrez comment ça marche

Tyler Smith

smithops

@tsmith · Membre depuis janvier 2026

Nouveau

Plant manager · automotive · 6 years in the field

Sujets
4
Réponses
35
Points
0
Nouveau10 points pour Membre

Activité récente

  1. Réponses à 2.3.0 : LoRaWAN ABP et Class C, plus de nouveaux symboles SCADA pour davantage d'industries

    There they are. The clinker cooler goes straight onto our kiln screen.

  2. Réponses à 2.3.0 : LoRaWAN ABP et Class C, plus de nouveaux symboles SCADA pour davantage d'industries

    Are the cement symbols a new library? We bought Heavy industry in September.

  3. Réponses à 2.2.1 : paramètres d'appareils à distance, références de base et tâches de modification en masse

    Ran our first job last week, 38 routers, one value in the network section. We set our own wave sizes (5 and 25, then…

  4. Réponses à ESP8266 comme broker MQTT local pour que les capteurs continuent de fonctionner quand Internet coupe ?

    @Rachel they can't, Hermetry never sees the data until it comes back. Same reason we keep local interlocks on the shop floor and use…

  5. Réponses à 2.3.0 : le rôle IoT viewer, pour les personnes qui ne font que regarder

    Good timing, we have an auditor from our insurer coming in two weeks. Half of what they want is the camera on the boiler…

  6. Réponses à Fermer les fenêtres de toit io-homecontrol depuis un Raspberry Pi quand il pleut

    Did exactly this on the roof lights over our paint shop canteen two years ago. What you want is the window maker's KLF 200…

  7. Réponses à Le moyen le moins cher de faire remonter les données d’un petit boîtier PoE depuis mon atelier

    Whatever you buy, make sure it is real 802.3af/at and not "passive PoE". We cooked two boards at the plant with a 24 V…

  8. Réponses à 2.1.0 : créez, modifiez et organisez vos propres tableaux de bord

    Two of us were customising the same shared board this morning and my save bounced back with a message that the dashboard had changed…