Neu: Die KI-Firewall überwacht die gesamte Plattform und erklärt jeden Vorfall in einfachen Worten. So funktioniert es

si_tyler

si_tyler

@twilson · Mitglied seit März 2026

Neuling

System integrator · energy · 15 years in the field

Themen
3
Antworten
20
Punkte
0
Neuling10 Punkte an Mitglied

Letzte Aktivität

  1. Geantwortet auf Die IT des Kunden lehnt jede Portweiterleitung an der Umspannstation ab: Braucht Edge überhaupt eingehenden Zugriff?

    A VPN is exactly the conversation I'm trying to avoid. Their security team treats any tunnel into their network as a new project with…

  2. Gestartet Die IT des Kunden lehnt jede Portweiterleitung an der Umspannstation ab: Braucht Edge überhaupt eingehenden Zugriff?

    Quick sanity check before I go back into a meeting with a utility customer's IT people. Site is a small substation building: 14 Modbus…

  3. Geantwortet auf ESP32-WROOM vs WROVER vs MINI: what do the module names mean and which do I buy?

    +1 to Grace. We lost a week on a site job because of a PCB antenna inside a steel cabinet.

  4. Geantwortet auf Yard sensors at the edge of Wi-Fi: why does it get so slow, and what do I do about it?

    Also those slow clients eat airtime for everyone on that AP. A frame at 1 Mbps occupies the channel for a long time.

  5. Geantwortet auf Uno setzt sich jedes Mal zurück, wenn mein Pi-Skript /dev/ttyUSB0 öffnet

    Easiest fix: don't restart the script. Run it as a systemd service with Restart=always, open the port once and never close it.

  6. Geantwortet auf USBasp am Mac erkennt meine ATmega328P-Boards nicht: "could not find USB device"

    Adapter it was. System Information showed nothing through my no-name USB-C dongle; through a powered hub it shows "USBasp" and avrdude finds it. Flashed…

  7. Geantwortet auf Night-time bed-exit alert for a care home: which sensor, and how do I only alert between 22:00 and 06:00?

    For the sensor: an FSR strip under the mattress works but needs calibrating per mattress and drifts as the foam ages. Load cells under…

  8. Geantwortet auf Firmware aus unserem US-Werk kopiert, Geräte im UK-Werk melden "bad username or password"

    Good catch. Worth putting the host in a config file instead of the build, so the next plant doesn't copy a hardcoded host.