reddysi
@nreddy · Membre depuis novembre 2025
System integrator · water and wastewater · 6 years in the field
- Sujets
- 3
- Réponses
- 14
- Points
- 0
Activité récente
-
Réponses à Capteurs sur les lampadaires du campus sans câblage : peut-on les alimenter sans fil ?
Put hysteresis on the battery rule, something like below 20 with a margin of 5. Cold mornings make batteries dip and you'll get an…
-
Réponses à 2.1.1 : une source de données d'exemple, les paramètres de tableau et les paquets de tableaux
Did exactly this for a client last week. The dry run listed two cards as Skipped, both process diagram cards, because the client org…
-
Question on the webhook part. Does "repaired after an outage" mean the calls that came in during the outage get run afterwards, or only…
-
We have Pi 4 gateways in small pump kiosks, each reading a flow meter and two pressure transmitters and sending to Hermetry. Three of…
-
Réponses à Buğra : solutions prêtes à l'emploi, flux et côté logiciel
Water site sounds very close to my day job, tanks and pump stations. Is it included or does it need something extra on the…
-
Both work, I have both in the field. On Bookworm it's much less fiddly, NetworkManager does the AP and the NAT in one go:…
-
Réponses à Le MCP3008 ne donne que 0 ou 1023 : comment prouver que le SPI fonctionne sur un Pi 3B+ ?
Is VREF tied to 3.3 V? If VREF floats you get exactly that 0 / 1023 behaviour.
-
Complementary filter at 0.98 and a timer-driven loop, and it stands. Tuned it with P=18, D=0.6, a tiny I, plus a 6 % deadband.…

