reddysi
@nreddy · Se unió el noviembre 2025
System integrator · water and wastewater · 6 years in the field
- Temas
- 3
- Respuestas
- 14
- Puntos
- 0
Actividad reciente
-
Respondidos ¿Sensores en los postes de luz del campus sin cableado: podemos alimentarlos de forma inalámbrica?
Put hysteresis on the battery rule, something like below 20 with a margin of 5. Cold mornings make batteries dip and you'll get an…
-
Respondidos 2.1.1: una fuente de datos de ejemplo, ajustes de tablero y paquetes de tableros
Did exactly this for a client last week. The dry run listed two cards as Skipped, both process diagram cards, because the client org…
-
Question on the webhook part. Does "repaired after an outage" mean the calls that came in during the outage get run afterwards, or only…
-
We have Pi 4 gateways in small pump kiosks, each reading a flow meter and two pressure transmitters and sending to Hermetry. Three of…
-
Respondidos Buğra: soluciones listas, flujos y la parte de software
Water site sounds very close to my day job, tanks and pump stations. Is it included or does it need something extra on the…
-
Respondidos ¿Pi 4 como punto de acceso Wi-Fi más enlace 4G para un cobertizo de finca, o comprar un router licenciado?
Both work, I have both in the field. On Bookworm it's much less fiddly, NetworkManager does the AP and the NAT in one go:…
-
Respondidos El MCP3008 solo da 0 o 1023: ¿cómo demuestro que el SPI funciona en una Pi 3B+?
Is VREF tied to 3.3 V? If VREF floats you get exactly that 0 / 1023 behaviour.
-
Complementary filter at 0.98 and a timer-driven loop, and it stands. Tuned it with P=18, D=0.6, a tiny I, plus a 6 % deadband.…

